Stainless Wire 0.15-12mm for Uniform Woven Mesh
Stainless Wire 0.15-12mm for Uniform Woven Mesh
Propiedades básicas
Lugar de origen:
China
Nombre de la marca:
Toponewire
Proceso de dar un título:
ISO9001:2015
Número de modelo:
201/302/304/316/316L
Propiedades comerciales
Cantidad mínima de pedido:
500 kg
Condiciones de pago:
D/P, L/C, T/T
Resumen del producto
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the ...
Atributos personalizados del producto
Resaltar
Stainless wire for woven mesh
,0.15-12mm stainless steel wire
,Annealed stainless steel wire
Material:
Acero inoxidable
Diámetro:
0.15-12m m
Embalaje:
por la petición del cliente
Estándar:
EN DE JIS G. ASTM. Estruendo. GB etc
Superficie:
Brillante o jabón cotaed
Capacidad de la fuente:
>500 toneladas por mes
Descripción del Producto
Especificaciones y Características Detalladas
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the mill. On a plain square weave the open area follows the ratio of aperture to pitch, so a small drift in wire diameter moves the open area by a measurable amount across a full roll.
Productos relacionados
