Stainless Wire 0.15-12mm for Uniform Woven Mesh
Stainless Wire 0.15-12mm for Uniform Woven Mesh
Proprietà di base
Luogo d'origine:
Cina
Marchio:
Toponewire
Certificazione:
ISO9001:2015
Numero di modello:
201/302/304/316/316L
Proprietà commerciali
Quantità minima di ordine:
500KG
Termini di pagamento:
D/P,L/C,T/T
Riepilogo Prodotto
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the ...
Attributi personalizzati del prodotto
Evidenziare
Stainless wire for woven mesh
,0.15-12mm stainless steel wire
,Annealed stainless steel wire
Materiale:
Acciaio inossidabile
Diametro:
0.15-12mm
Imballaggio:
dalla richiesta del cliente
Standard:
EN DI JIS G. ASTM. BACCANO. GB ecc
Superficie:
Luminoso o sapone cotaed
Capacità di alimentazione:
>500 tonnellate al mese
Descrizione del prodotto
Specifiche e Caratteristiche Dettagliate
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the mill. On a plain square weave the open area follows the ratio of aperture to pitch, so a small drift in wire diameter moves the open area by a measurable amount across a full roll.
Prodotti correlati
