Stainless Wire 0.15-12mm for Uniform Woven Mesh
Stainless Wire 0.15-12mm for Uniform Woven Mesh
기본 속성
원산지:
중국
브랜드 이름:
Toponewire
인증:
ISO9001:2015
모델 번호:
201/302/304/316/316L
거래 자산
최소 주문 수량:
500KG
지불 조건:
D/P,L/C,T/T
제품 요약
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the ...
제품 맞춤 속성
강조하다
Stainless wire for woven mesh
,0.15-12mm stainless steel wire
,Annealed stainless steel wire
재료:
스테인레스 스틸
지름:
0.15-12mm
포장:
고객 요청에 의해
기준:
JIS G. EN. ASTM. DIN. GB 기타 등등
표면:
헤드라이트 또는 Soap 코트아에드
공급 능력:
달 당 >500 톤
제품 설명
세부 사양 및 특징
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the mill. On a plain square weave the open area follows the ratio of aperture to pitch, so a small drift in wire diameter moves the open area by a measurable amount across a full roll.
관련 제품
