Stainless Wire 0.15-12mm for Uniform Woven Mesh
Stainless Wire 0.15-12mm for Uniform Woven Mesh
Grundlegende Eigenschaften
Herkunftsort:
China
Markenname:
Toponewire
Zertifizierung:
ISO9001:2015
Modellnummer:
201/302/304/316/316L
Handelsimmobilien
Mindestbestellmenge:
500 kg
Zahlungsbedingungen:
D/P,L/C,T/T
Produktübersicht
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the ...
Produktanpassungsattribute
Hervorheben
Stainless wire for woven mesh
,0.15-12mm stainless steel wire
,Annealed stainless steel wire
Material:
Edelstahl
Durchmesser:
0.15-12mm
Verpackung:
durch Kundenantrag
Standard:
JIS G. EN. ASTM. LÄRM. GB usw.
Oberfläche:
Hell oder Seife cotaed
Versorgungsmaterial-Fähigkeit:
>500 Tonnen pro Monat
Produktbeschreibung
Detaillierte Spezifikationen & Funktionen
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the mill. On a plain square weave the open area follows the ratio of aperture to pitch, so a small drift in wire diameter moves the open area by a measurable amount across a full roll.
Verwandte Produkte
