Stainless Wire 0.15-12mm for Uniform Woven Mesh
Stainless Wire 0.15-12mm for Uniform Woven Mesh
Temel Özellikler
Menşe Yeri:
Çin
Marka Adı:
Toponewire
Sertifikasyon:
ISO9001:2015
Model Numarası:
201/302/304/316/316L
Ticari Gayrimenkuller
Minimum Sipariş Miktarı:
500kg
Ödeme Koşulları:
D/P, L/C, T/T
Ürün Özetleri
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the ...
Ürün Özel Nitelikleri
Vurgulamak
Stainless wire for woven mesh
,0.15-12mm stainless steel wire
,Annealed stainless steel wire
Malzeme:
Paslanmaz çelik
Çap:
0,15-12 mm
Ambalaj:
müşteri isteğine göre
Standart:
JIS G. EN. JIS G.EN. ASTM. ASTM. DIN. DİN. GB etc <
Yüzey:
Parlak veya Sabun kaplamalı
Yetenek temini:
Ayda >500 ton
Ürün Açıklaması
Ayrıntılı özellikler ve özellikler
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the mill. On a plain square weave the open area follows the ratio of aperture to pitch, so a small drift in wire diameter moves the open area by a measurable amount across a full roll.
İlgili Ürünler
