Stainless Wire 0.15-12mm for Uniform Woven Mesh
Stainless Wire 0.15-12mm for Uniform Woven Mesh
Properti Dasar
Tempat Asal:
Tiongkok
Nama Merek:
Toponewire
Sertifikasi:
ISO9001:2015
Nomor Model:
201/302/304/316/316L
Properti Perdagangan
Jumlah Pesanan Minimum:
500KG
Ketentuan Pembayaran:
D/p, l/c, t/t
Ringkasan Produk
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the ...
Atribut Kustom Produk
Menyoroti
Stainless wire for woven mesh
,0.15-12mm stainless steel wire
,Annealed stainless steel wire
Bahan:
Baja Tahan Karat
Diameter:
0,15-12mm
Sedang mengemas:
oleh permintaan pelanggan
Standar:
JIS G. EN. JIS G.EN. ASTM. ASTM. DIN. KERIUHAN. GB etc<
Permukaan:
Bright atau Soap cotaed
Menyediakan kemampuan:
>500 ton per bulan
Deskripsi Produk
Spesifikasi & Fitur Detail
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the mill. On a plain square weave the open area follows the ratio of aperture to pitch, so a small drift in wire diameter moves the open area by a measurable amount across a full roll.
Produk Terkait
