Stainless Wire 0.15-12mm for Uniform Woven Mesh
Stainless Wire 0.15-12mm for Uniform Woven Mesh
Основные свойства
Место происхождения:
Китай
Название бренда:
Toponewire
Сертификация:
ISO9001:2015
Номер модели:
201/302/304/316/316L
Торговая недвижимость
Минимальное количество заказа:
500 кг
Условия оплаты:
Д/П, Л/К, Т/Т
Резюме продукта
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the ...
Атрибуты продукта
Выделить
Stainless wire for woven mesh
,0.15-12mm stainless steel wire
,Annealed stainless steel wire
Материал:
Нержавеющая сталь
Диаметр:
0.15-12mm
Упаковка:
запросом клиента
Стандартный:
EN G. JIS. ASTM. DIN. GB etc
Поверхность:
Cotaed яркий или мыло
Поставка способности:
>500 тонн в месяц
Описание продукта
Подробные спецификации и характеристики
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the mill. On a plain square weave the open area follows the ratio of aperture to pitch, so a small drift in wire diameter moves the open area by a measurable amount across a full roll.
Сопутствующие товары
