Stainless Wire 0.15-12mm for Uniform Woven Mesh
Stainless Wire 0.15-12mm for Uniform Woven Mesh
ویژگی های اساسی
محل مبدا:
چین
نام تجاری:
Toponewire
گواهینامه:
ISO9001:2015
شماره مدل:
201/302/304/316/316L
خواص معاملاتی
حداقل مقدار سفارش:
500 کیلوگرم
شرایط پرداخت:
D/P ، L/C ، T/T
خلاصه محصول
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the ...
ویژگی های سفارشی محصول
برجسته کردن
Stainless wire for woven mesh
,0.15-12mm stainless steel wire
,Annealed stainless steel wire
مواد:
فولاد ضد زنگ
قطر:
0.15-12 میلی متر
بسته بندی:
با درخواست مشتری
استاندارد:
JIS G. EN. JIS G. EN. ASTM. ASTM. DIN. DIN. GB etc
سطح:
روشن یا با روکش صابونی
قابلیت ارائه:
بیش از 500 تن در ماه
توضیحات محصول
مشخصات و ویژگی‌های دقیق
Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the mill. On a plain square weave the open area follows the ratio of aperture to pitch, so a small drift in wire diameter moves the open area by a measurable amount across a full roll.
محصولات مرتبط
