logo
86-574-88328001
IN

302 Spring Wire - Kinks and Pay-Off Tension Control

302 Spring Wire - Kinks and Pay-Off Tension Control
Properti Dasar
Tempat Asal: Tiongkok
Nama Merek: TOPONE
Sertifikasi: ISO/SGS/RosH
Nomor Model: 302
Properti Perdagangan
Jumlah Pesanan Minimum: 1000kg
Harga: Bisa dinegosiasikan
Ketentuan Pembayaran: T/T,L/C
Kemampuan Pasokan: > 1000 ton per bulan
Tag:

Kawat Baja Tahan Karat

kawat pegas ss

gulungan kawat ss
Ringkasan Produk
2.2mm 302 Sabun-dilapisi stainless steel spring kawat
Atribut Kustom Produk
Menyoroti

302 stainless steel spring wire

,

kink-resistant spring wire

,

pay-off tension control wire

Sertifikasi:
ISO,SGS,Rosh
Aplikasi:
SPRING/SCREW/WIRE Form/Fishing
Diameter:
0,15-12mm
Bahan:
302
Permukaan:
Dilapisi Bright/Soap
Nama Produk:
3.5mm 316 kawat pegas stainless
Jenis:
Keras/lembut
Sedang mengemas:
gulungan, kumparan
Deskripsi Produk
Spesifikasi & Fitur Detail
302 Spring Wire - Kinks and Pay-Off Tension Control Of all the defects that stop a coiler, the kink is the least visible on a certificate and the most expensive in lost time. A kink is a short permanent bend where the wire was folded tighter than its own elastic limit, and it cannot be straightened by tension. It arrives at the feed rolls as a hard spot, jams the tooling, and if it reaches the spring it leaves a notch that fails in fatigue. This page explains where kinks come
Produk Terkait

Cold Heading Stainless Steel Wire - Soap Coating, Low Wear

Cold Heading Stainless Steel Wire with Soap Coating for Stable Feeding Product Introduction The surface film on a cold heading wire does two jobs at the same time: it separates the wire from the cut-off tool, and it lets the feed rolls grip without slip. Both jobs are set by the coating system, not ...

Kawat Stainless 0.15-12mm, Dipotong Sesuai Panjang dan Didebur

Cut-to-Length Stainless Wire: Tolerance, Ends and Straightness Buying wire by length instead of by coil moves three problems from the customer's shop to the supplier's: the cut tolerance, the condition of the two ends, and whether the piece is still straight when it arrives. All three have to be ...

Kawat Stainless 0,15-12mm, Pengelasan dan Selesai Pasca Pengelasan

Welding Stainless Steel Wire: Grade, Heat Input and What Comes After Welding wire is usually discussed as a filler question. On stainless wire it is three decisions instead: the carbon level of the wire, the heat input at the joint, and what happens to the surface after the arc stops. Get the grade ...

Smooth Surface Stainless Wire 0.15-12mm, Low Friction

Smooth Surface Stainless Steel Wire for Sliding and Guide Contact Where wire runs against a guide, a roller or another wire, surface condition decides friction and debris. Die lines, scratches and drawing marks create local contact points that wear the guide and shed particles into the process. A ...