logo
86-574-88328001
GE

302 Spring Wire - Kinks and Pay-Off Tension Control

302 Spring Wire - Kinks and Pay-Off Tension Control
Grundlegende Eigenschaften
Herkunftsort: China
Markenname: TOPONE
Zertifizierung: ISO/SGS/RosH
Modellnummer: 302
Handelsimmobilien
Mindestbestellmenge: 1000kg
Preis: Verhandelbar
Zahlungsbedingungen: T/T, L/C
Lieferfähigkeit: > 1000 Tonnen pro Monat
Schlagworte:

Edelstahldraht

ss Federdraht

Edelstahl-Drahtspule
Produktübersicht
2,2mm 302 seifengeschliffener Edelstahlfederdraht
Produktanpassungsattribute
Hervorheben

302 stainless steel spring wire

,

kink-resistant spring wire

,

pay-off tension control wire

Zertifizierung:
ISO,SGS,Rosh
Anwendung:
Federn/Schraube/Drahtform/Fischen
Durchmesser:
0.15-12mm
Material:
302
Oberfläche:
Hell/seife beschichtet
Produktname:
3,5 mm 316 Edelstahlfederdraht
Typ:
Hart/weich
Verpackung:
Spule, Spule
Produktbeschreibung
Detaillierte Spezifikationen & Funktionen
302 Spring Wire - Kinks and Pay-Off Tension Control Of all the defects that stop a coiler, the kink is the least visible on a certificate and the most expensive in lost time. A kink is a short permanent bend where the wire was folded tighter than its own elastic limit, and it cannot be straightened by tension. It arrives at the feed rolls as a hard spot, jams the tooling, and if it reaches the spring it leaves a notch that fails in fatigue. This page explains where kinks come
Verwandte Produkte

302 Federdraht - Guss und Helix für automatische Zuführung

302 Spring Wire - Cast and Helix for Auto Feeding Cast and helix are the two descriptions of coil shape that appear on almost every spring wire specification and are ignored on almost every purchase order. They decide whether a coil feeds smoothly into an automatic coiler, whether the wire tangles ...

Geglühtes Edelstahlprofil-Draht - Korngrößenkontrolle

Annealed Stainless Profile Wire - Grain Size Control Two coils of annealed stainless wire can share the same grade, the same diameter and the same tensile strength, and still behave differently on the same press. The difference is usually grain size. Grain size controls how the metal distributes ...

Edelstahldraht 0,15–12 mm für gleichmäßig gewebtes Netz

Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the ...

0.15mm Fine Stainless Steel Wire - Even Spinning Tension

0.15-0.3mm Fine Stainless Steel Wire for Spinning This fine stainless steel wire is produced in 304 and 316 grades with a typical diameter of 0.15-0.3mm . The full production range covers 0.15-12mm , so fine wire and heavier sections can be sourced from the same qualified line. The wire is cold ...