logo
86-574-88328001
IN

Cold Heading Stainless Steel Wire - Soap Coating, Low Wear

Cold Heading Stainless Steel Wire - Soap Coating, Low Wear
Properti Dasar
Tempat Asal: Tiongkok
Nama Merek: TOPONE
Sertifikasi: ISO9001:2015
Nomor Model: SUS 302/304/316 dll
Properti Perdagangan
Jumlah Pesanan Minimum: 1000kg
Harga: Bisa dinegosiasikan
Ketentuan Pembayaran: T/T,L/C,D/A,D/P,
Kemampuan Pasokan: > 10000KGS per minggu
Tag:

Kawat baja yang ditarik dingin

Kawat tempa dingin

Kawat Pos Dingin Stainless Steel
Ringkasan Produk
Cold Heading Stainless Steel Wire with Soap Coating for Stable Feeding Product Introduction The surface film on a cold heading wire does two jobs at the same time: it separates the wire from the cut-off tool, and it lets the feed rolls grip without slip. Both jobs are set by the coating system, not ...
Atribut Kustom Produk
Menyoroti

Cold Heading Stainless Steel Wire

,

Soap Coated Stainless Steel Wire

,

Low Wear Cold Heading Wire

Bahan:
SUS 302/304/316 dll
Permukaan:
terang
Koil diameter dalam:
0,15-12mm
Standar:
JIS G. EN. JIS G.EN. ASTM. ASTM. DIN. KERIUHAN. GB etc<
Sedang mengemas:
Coil atau kemasan khusus dengan plat
Deskripsi Produk
Spesifikasi & Fitur Detail
Cold Heading Stainless Steel Wire with Soap Coating for Stable Feeding Product Introduction The surface film on a cold heading wire does two jobs at the same time: it separates the wire from the cut-off tool, and it lets the feed rolls grip without slip. Both jobs are set by the coating system, not by the steel grade alone. Our cold heading wire uses a borax carrier with a stearate soap film on top. Coating weight is stated in grams per square metre and checked by gravimetric
Produk Terkait

302 Spring Wire - Drawing Die Material and Surface

302 Spring Wire - Drawing Die Material and Surface Two suppliers can draw the same rod down to 1.4 mm in 302 and deliver wire that looks the same on a certificate but differs on the surface. The difference is usually the die: which material it was made from, how long it has run, and whether the ...

430 Kawat Tahan Karat 0,15-12mm untuk Siklus Panas dan Termal

430 Stainless Steel Wire for Heat Exposure and Thermal Cycling 430 is often ordered as the cheaper alternative to 304. In parts that cycle between hot and cold, the real reason is different: thermal expansion. 430 is ferritic with a linear expansion coefficient around 10.4 x 10-6 /K, against roughly ...

1.8mm SUS304 Annealed Wire 0.15-12mm for Braiding

1.8mm SUS304 Annealed Stainless Steel Wire for Braiding and Weaving On a braiding machine every carrier feeds at the same speed. If one spool runs a slightly heavier gauge, the braid angle changes and the hose cover shows a bulge. Diameter consistency, not tensile alone, decides whether a 1.8mm ...

Stainless Scourer Wire 430/304 - Uniform Mesh, 0.15-12mm

430/304 Stainless Steel Scourer Wire for Uniform Mesh Structure Scourer wire is used for stainless steel scouring pads and cleaning mesh, where wire diameter consistency and surface condition determine how evenly the mesh forms and how the finished pad performs. This wire is supplied in 430 and 304 ...