logo
86-574-88328001
GE

Cold Heading Stainless Steel Wire - Soap Coating, Low Wear

Cold Heading Stainless Steel Wire - Soap Coating, Low Wear
Grundlegende Eigenschaften
Herkunftsort: China
Markenname: TOPONE
Zertifizierung: ISO9001:2015
Modellnummer: SUS 302/304/316 usw.
Handelsimmobilien
Mindestbestellmenge: 1000kg
Preis: Verhandelbar
Zahlungsbedingungen: T/T, L/C, D/A, D/P,
Lieferfähigkeit: >10000KGS pro Woche
Schlagworte:

Kalt gezogenes Stahldraht

Kaltgewalzte Drähte

Kaltstauchdraht aus Edelstahl
Produktübersicht
Cold Heading Stainless Steel Wire with Soap Coating for Stable Feeding Product Introduction The surface film on a cold heading wire does two jobs at the same time: it separates the wire from the cut-off tool, and it lets the feed rolls grip without slip. Both jobs are set by the coating system, not ...
Produktanpassungsattribute
Hervorheben

Cold Heading Stainless Steel Wire

,

Soap Coated Stainless Steel Wire

,

Low Wear Cold Heading Wire

Material:
SUS 302/304/316 usw.
Oberfläche:
hell
Spulendurchmesser:
0.15-12mm
Standard:
JIS G. EN. ASTM. LÄRM. GB usw.
Verpackung:
Spule oder spezielle Verpackung mit Platte
Produktbeschreibung
Detaillierte Spezifikationen & Funktionen
Cold Heading Stainless Steel Wire with Soap Coating for Stable Feeding Product Introduction The surface film on a cold heading wire does two jobs at the same time: it separates the wire from the cut-off tool, and it lets the feed rolls grip without slip. Both jobs are set by the coating system, not by the steel grade alone. Our cold heading wire uses a borax carrier with a stearate soap film on top. Coating weight is stated in grams per square metre and checked by gravimetric
Verwandte Produkte

Kaltgezogener Edelstahldraht – stabile Festigkeitskontrolle

Cold Drawn Stainless Steel Wire - Stable Strength Control Cold drawn stainless steel wire acquires its dimensional accuracy and mechanical strength from a sequence of drawing passes, not from a single operation. Each pass reduces the cross-sectional area by a defined amount, and the accumulated ...

Edelstahldraht 0,15–12 mm, Washdown- und CIP-Qualität

Washdown and CIP: Choosing Between 304 and 316L Wire In equipment that is cleaned in place, the cleaning agent decides the grade more often than the product does. Two stainless parts can see identical product contact and completely different service life, because one is rinsed with chlorinated foam ...

Edelstahldraht 0,15-12 mm, bis in die Länge geschnitten und abgebrochen

Cut-to-Length Stainless Wire: Tolerance, Ends and Straightness Buying wire by length instead of by coil moves three problems from the customer's shop to the supplier's: the cut tolerance, the condition of the two ends, and whether the piece is still straight when it arrives. All three have to be ...

Edelstahldraht 0,15–12 mm, Durchmessertoleranzkontrolle

Stainless Steel Wire Diameter Tolerance and How It Is Measured Diameter is the one number on a wire purchase order that both sides assume is understood, and it is also the one that causes most disputes. A tolerance band quoted without a measuring method can be met by one instrument and missed by ...