logo
86-574-88328001
IT

Micro Spring Wire - Precision Spool Winding, No Tangles

Micro Spring Wire - Precision Spool Winding, No Tangles
Proprietà di base
Luogo d'origine: Cina
Marchio: Topone
Certificazione: ASTM
Numero di modello: 304, 304L, 316, 316L, 430
Proprietà commerciali
Quantità minima di ordine: 100 kg
Termini di pagamento: L/c, t/t, d/a
Tag:

Filo di acciaio inossidabile

Cavo degli ss

Filo di acciaio inossidabile per molle
Riepilogo Prodotto
Micro Spring Wire on Precision Wound Spools for Tangle-Free Pay-Off Product Introduction Below about 0.5 mm, wire stops behaving like wire and starts behaving like thread. It will not push, it will not straighten itself, and if one turn crosses another on the spool it pulls a loop instead of feeding...
Attributi personalizzati del prodotto
Evidenziare

Micro spring wire precision spool

,

No-tangle colored stainless steel wire

,

Precision wound micro spring wire

Applicazione:
di acciaio inossidabile
Resistenza alla temperatura:
Alto
Superficie:
luminoso
Utilizzo:
varie applicazioni
Materiale:
Acciaio inossidabile
Diametro:
0,15 mm - 12 mm
Durabilità:
Di lunga durata
Peso:
Leggero
Descrizione del prodotto
Specifiche e Caratteristiche Dettagliate
Micro Spring Wire on Precision Wound Spools for Tangle-Free Pay-Off Product Introduction Below about 0.5 mm, wire stops behaving like wire and starts behaving like thread. It will not push, it will not straighten itself, and if one turn crosses another on the spool it pulls a loop instead of feeding. This micro spring wire is wound with a controlled traverse pitch, layer on layer, so each turn sits in the valley of the one below. The result is a spool that pays off at
Prodotti correlati

Filo inossidabile 0,15-12 mm, difetti superficiali e limiti

Surface Defects on Stainless Wire: Naming Them and Setting Limits Surface quality is one of the few wire properties still agreed in words rather than numbers. That is where most disputes come from: two parties say "good surface" and mean two different things, and the argument only starts after the ...

Filo inossidabile da 0,15-12 mm, grado Washdown e CIP

Washdown and CIP: Choosing Between 304 and 316L Wire In equipment that is cleaned in place, the cleaning agent decides the grade more often than the product does. Two stainless parts can see identical product contact and completely different service life, because one is rinsed with chlorinated foam ...

Filo inossidabile ricotto 0,15-12 mm, guida per raggio di curvatura

Minimum Bend Radius on Annealed Stainless Wire: A Practical Guide When a drawing specifies a bend, the question behind it is usually whether the wire will crack at that radius. The answer depends on three things: wire diameter, the tensile band of the coil, and where surface defects sit relative to ...

6.5mm 304 Stainless EPQ Wire - Heavy Forming Grade

6.5mm 304 Stainless Steel EPQ Wire for Heavy Wire Forming At 6.5mm, wire forming loads and spring-back are significantly higher than for fine wire, so the wire must combine controlled diameter, annealed ductility and a clean surface. This EPQ (extra press quality) wire is produced in 304 grade, with ...