logo
86-574-88328001
IN

Micro Spring Wire - Precision Spool Winding, No Tangles

Micro Spring Wire - Precision Spool Winding, No Tangles
Properti Dasar
Tempat Asal: Tiongkok
Nama Merek: Topone
Sertifikasi: ASTM
Nomor Model: 304, 304L, 316, 316L, 430
Properti Perdagangan
Jumlah Pesanan Minimum: 100KG
Ketentuan Pembayaran: L/c, t/t, d/a
Tag:

Kawat Baja Tahan Karat

Kawat SS

Kawat pegas baja tahan karat
Ringkasan Produk
Micro Spring Wire on Precision Wound Spools for Tangle-Free Pay-Off Product Introduction Below about 0.5 mm, wire stops behaving like wire and starts behaving like thread. It will not push, it will not straighten itself, and if one turn crosses another on the spool it pulls a loop instead of feeding...
Atribut Kustom Produk
Menyoroti

Micro spring wire precision spool

,

No-tangle colored stainless steel wire

,

Precision wound micro spring wire

Aplikasi:
kawat datar baja tahan karat
Ketahanan Suhu:
Tinggi
Permukaan:
terang
Penggunaan:
Berbagai aplikasi
Bahan:
Baja Tahan Karat
Diameter:
0,15mm - 12mm
Daya tahan:
Tahan lama
Berat:
Ringan
Deskripsi Produk
Spesifikasi & Fitur Detail
Micro Spring Wire on Precision Wound Spools for Tangle-Free Pay-Off Product Introduction Below about 0.5 mm, wire stops behaving like wire and starts behaving like thread. It will not push, it will not straighten itself, and if one turn crosses another on the spool it pulls a loop instead of feeding. This micro spring wire is wound with a controlled traverse pitch, layer on layer, so each turn sits in the valley of the one below. The result is a spool that pays off at
Produk Terkait

Kawat Pegas Halus 302 - Uji Torsi sebagai Gerbang Kualitas

302 Fine Spring Wire - Torsion Test as Quality Gate At 0.2 mm, a surface defect that would be visible on a 2 mm wire is invisible, and an internal inclusion is impossible to see at all. The torsion test exists for exactly this gap. It twists a short length of wire until it breaks and counts the ...

Kawat Stainless 0.15-12mm, Dipotong Sesuai Panjang dan Didebur

Cut-to-Length Stainless Wire: Tolerance, Ends and Straightness Buying wire by length instead of by coil moves three problems from the customer's shop to the supplier's: the cut tolerance, the condition of the two ends, and whether the piece is still straight when it arrives. All three have to be ...

Kawat Stainless Tahan Korosi 0,15-12mm, Anil

Corrosion Resistant Stainless Steel Wire, Annealed 0.15-12 mm Corrosion resistance is usually discussed as a grade property, but on a finished part it is often a processing property. Cold drawing leaves residual tensile stress in the wire, and that stress is where chloride pitting and stress ...

1.2mm 669 Bright Annealed Wire 0.15-12mm for Forming

Bright Annealed 1.2mm 669 Stainless Wire for Visible Parts Bright annealing is the step that decides whether a stainless wire part can be sold without polishing. The wire is annealed in a controlled reducing atmosphere straight after drawing, so no oxide scale forms and the surface stays metallic ...