logo
86-574-88328001
IN

302 Stainless Spring Wire - Carbon Content and Drawn Strength

302 Stainless Spring Wire - Carbon Content and Drawn Strength
Properti Dasar
Tempat Asal: Tiongkok
Nama Merek: Toponewire
Sertifikasi: ISO9001:2015
Nomor Model: SUS 302
Properti Perdagangan
Jumlah Pesanan Minimum: Perundingan
Harga: Bisa dinegosiasikan
Ketentuan Pembayaran: T/T,L/C,D/A,D/P
Kemampuan Pasokan: 500ton per bulan
Tag:

Kawat Baja Tahan Karat

kawat pegas ss

gulungan kawat ss
Ringkasan Produk
302 Stainless Spring Wire - Carbon Content and Drawn Strength Product Introduction 302 and 304 are often treated as the same wire with two names, and for many applications they behave that way. The difference that matters on a spring is carbon: 302 carries up to 0.15% carbon against the 0.08% ...
Atribut Kustom Produk
Menyoroti

302 stainless spring wire

,

stainless steel spring wire

,

drawn strength spring wire

Bahan:
SUS 302
Permukaan:
Dilapisi sabun/Cerah
Koil diameter dalam:
250-1000mm
Standar:
JIS G.EN10270-3. ASTM. KERIUHAN. GB dll
Sedang mengemas:
Coil atau spool dengan piring
Menyediakan kemampuan:
>500 ton per bulan
Deskripsi Produk
Spesifikasi & Fitur Detail
302 Stainless Spring Wire - Carbon Content and Drawn Strength Product Introduction 302 and 304 are often treated as the same wire with two names, and for many applications they behave that way. The difference that matters on a spring is carbon: 302 carries up to 0.15% carbon against the 0.08% ceiling of 304. That extra carbon in solid solution strengthens the austenite, and after cold drawing the gap widens further. At the same diameter and the same reduction, a drawn 302
Produk Terkait

Kawat Stainless 0.15-12mm, Dipotong Sesuai Panjang dan Didebur

Cut-to-Length Stainless Wire: Tolerance, Ends and Straightness Buying wire by length instead of by coil moves three problems from the customer's shop to the supplier's: the cut tolerance, the condition of the two ends, and whether the piece is still straight when it arrives. All three have to be ...

Kawat SUS304 0,15-12mm, Pembuatan dan Pengepakan Kumparan

Coil Build, Spool and Packing: What Wire Buyers Should Specify A specification sheet usually says coil weight 5-250 kg and stops there. On the shop floor the number that matters is not the weight but whether the coil pays off without stopping the line. Three details decide that: coil weight against ...

430 Kawat Tahan Karat 0,15-12mm untuk Siklus Panas dan Termal

430 Stainless Steel Wire for Heat Exposure and Thermal Cycling 430 is often ordered as the cheaper alternative to 304. In parts that cycle between hot and cold, the real reason is different: thermal expansion. 430 is ferritic with a linear expansion coefficient around 10.4 x 10-6 /K, against roughly ...

Kawat Stainless 0,15-12mm untuk Jaring Tenun Seragam

Stainless Steel Wire for Woven Mesh: Holding Aperture to Tolerance A filter cloth is usually ordered by aperture, but what the weaving mill actually controls is wire diameter, warp tension and weft density. Those three values set the opening, and wire diameter is the one supplied from outside the ...