logo
86-574-88328001
SP

302 Stainless Spring Wire - Carbon Content and Drawn Strength

302 Stainless Spring Wire - Carbon Content and Drawn Strength
Propiedades básicas
Lugar de origen: China
Nombre de la marca: Toponewire
Proceso de dar un título: ISO9001:2015
Número de modelo: SUS 302
Propiedades comerciales
Cantidad mínima de pedido: Negociación
Precio: Negociable
Condiciones de pago: T/T, L/C, D/A, D/P
Capacidad de suministro: 500 toneladas por mes
Etiquetas:

Alambre de acero inoxidable

alambre de resorte ss

ss bobina de alambre
Resumen del producto
302 Stainless Spring Wire - Carbon Content and Drawn Strength Product Introduction 302 and 304 are often treated as the same wire with two names, and for many applications they behave that way. The difference that matters on a spring is carbon: 302 carries up to 0.15% carbon against the 0.08% ...
Atributos personalizados del producto
Resaltar

302 stainless spring wire

,

stainless steel spring wire

,

drawn strength spring wire

Material:
SUS 302
Superficie:
Jabón cubierto/brillante
Diámetro interno de la bobina:
250-1000m m
Estándar:
JIS G. EN10270-3. ASTM. Estruendo. GB etc
Embalaje:
Bobina o carrete con la placa
Capacidad de la fuente:
>500 toneladas por mes
Descripción del Producto
Especificaciones y Características Detalladas
302 Stainless Spring Wire - Carbon Content and Drawn Strength Product Introduction 302 and 304 are often treated as the same wire with two names, and for many applications they behave that way. The difference that matters on a spring is carbon: 302 carries up to 0.15% carbon against the 0.08% ceiling of 304. That extra carbon in solid solution strengthens the austenite, and after cold drawing the gap widens further. At the same diameter and the same reduction, a drawn 302
Productos relacionados

302 Alambre de Acero Inoxidable - Consistencia de Lote y Control Cpk

302 Stainless Wire - Batch Consistency and Cpk Control Two deliveries of the same grade at the same diameter can both be inside specification and still cause different problems, because a specification sets limits and does not describe the distribution inside them. One lot may run tightly around the ...

Alambre Inoxidable 0.15-12mm, Acabado para Soldadura y Post-Soldadura

Welding Stainless Steel Wire: Grade, Heat Input and What Comes After Welding wire is usually discussed as a filler question. On stainless wire it is three decisions instead: the carbon level of the wire, the heat input at the joint, and what happens to the surface after the arc stops. Get the grade ...

Alambre inoxidable de 0,15 a 12 mm, certificado de prueba de molino 3.1

430 Stainless Steel Wire and the Mill Test Report: Reading Each Value A mill test report is usually filed without being read. On 430 that is a missed opportunity, because the three things that decide how the coil behaves at the press and how the part behaves in service - carbon level, chromium level ...

Alambre inoxidable recocido suave de 0,15 a 12 mm, control de recocido

Annealing Control: Why Two Soft Coils Can Feel Different Two coils can both be labelled annealed, both sit inside 550-750 N/mm2, and still behave differently at the press. The reason is that "soft" is a range, and where a coil sits inside that range is decided by the annealing practice rather than ...