logo
86-574-88328001
GE

304 Spring Wire - Tensile Strength Over Hardness Numbers

304 Spring Wire - Tensile Strength Over Hardness Numbers
Grundlegende Eigenschaften
Herkunftsort: China
Markenname: Topone
Zertifizierung: ASTM
Modellnummer: 304, 304L, 316, 316L, 430
Handelsimmobilien
Mindestbestellmenge: 1000 Stück
Zahlungsbedingungen: L/c, t/t, d/a
Schlagworte:

Torsionsfedern

DRAHT-FORM

Drahtbiegeverlängerung
Produktübersicht
Federdraht aus rostfreiem Edelstahl 304 in 0,15–12 mm, zugelassen für Zugfestigkeit gemäß EN 10270-3 und ASTM A580, mit HV/HRC-Umrechnungsanleitung für Zeichnungen. Gezogene Gemüter, 3,1 MTC.
Produktanpassungsattribute
Hervorheben

304 spring wire tensile strength

,

304 stainless wire forming

,

spring wire hardness numbers

Anwendung:
Flachdraht aus Edelstahl
Temperaturbeständigkeit:
Hoch
Verwendung:
Verschiedene Anwendungen
Material:
Edelstahl
Artikel:
mit einer Breite von mehr als 20 mm
Länge:
Maßgeschneidert
Durchmesserbereich:
0,15 mm - 12 mm
Oberflächenbeschaffenheit:
Helle Oberfläche / seifenbeschichtet
Verpackung:
Spulenverpackung / kundenspezifische Verpackung
Produktbeschreibung
Detaillierte Spezifikationen & Funktionen
304 Spring Wire - Tensile Strength Over Hardness Numbers Product Introduction TOPONE supplies 304 stainless steel spring wire in 0.15-12 mm diameters, delivered in the standard drawn tempers of EN 10270-3 and tested by tensile strength - not by hardness. This page explains why tensile testing is the correct acceptance method for spring wire and how to compare hardness figures correctly when a drawing calls for them. Product Specifications Parameter Specification Grade 304
Verwandte Produkte

Kaltumformungs-Edelstahldraht - Seifenbeschichtung, geringer Verschleiß

Cold Heading Stainless Steel Wire with Soap Coating for Stable Feeding Product Introduction The surface film on a cold heading wire does two jobs at the same time: it separates the wire from the cut-off tool, and it lets the feed rolls grip without slip. Both jobs are set by the coating system, not ...

302 Feiner Federdraht - Torsionsprüfung als Qualitätsgrenze

302 Fine Spring Wire - Torsion Test as Quality Gate At 0.2 mm, a surface defect that would be visible on a 2 mm wire is invisible, and an internal inclusion is impossible to see at all. The torsion test exists for exactly this gap. It twists a short length of wire until it breaks and counts the ...

Edelstahldraht 0,15-12 mm, bis in die Länge geschnitten und abgebrochen

Cut-to-Length Stainless Wire: Tolerance, Ends and Straightness Buying wire by length instead of by coil moves three problems from the customer's shop to the supplier's: the cut tolerance, the condition of the two ends, and whether the piece is still straight when it arrives. All three have to be ...

430 Edelstahldraht 0,15–12 mm für Hitze- und Temperaturwechsel

430 Stainless Steel Wire for Heat Exposure and Thermal Cycling 430 is often ordered as the cheaper alternative to 304. In parts that cycle between hot and cold, the real reason is different: thermal expansion. 430 is ferritic with a linear expansion coefficient around 10.4 x 10-6 /K, against roughly ...