logo
86-574-88328001
IN

304 Spring Wire - Tensile Strength Over Hardness Numbers

304 Spring Wire - Tensile Strength Over Hardness Numbers
Properti Dasar
Tempat Asal: Tiongkok
Nama Merek: Topone
Sertifikasi: ASTM
Nomor Model: 304, 304L, 316, 316L, 430
Properti Perdagangan
Jumlah Pesanan Minimum: 1000 buah
Ketentuan Pembayaran: L/c, t/t, d/a
Tag:

Mata air torsion

Bentuk kawat

Pembentukan kawat Ekstensi
Ringkasan Produk
Kawat pegas tahan karat 304 dalam ukuran 0,15-12 mm, diterima berdasarkan kekuatan tarik sesuai EN 10270-3 dan ASTM A580, dengan panduan konversi HV/HRC untuk gambar. Kemarahan, 3,1 MTC.
Atribut Kustom Produk
Menyoroti

304 spring wire tensile strength

,

304 stainless wire forming

,

spring wire hardness numbers

Aplikasi:
kawat datar baja tahan karat
Ketahanan Suhu:
Tinggi
Penggunaan:
Berbagai aplikasi
Bahan:
Baja Tahan Karat
Barang:
Pegas Stainless Seel
Panjang:
Disesuaikan
Kisaran Diameter:
0,15mm - 12mm
Permukaan Selesai:
Permukaan Cerah / Dilapisi Sabun
Sedang mengemas:
Pengepakan Coil / Pengepakan Khusus
Deskripsi Produk
Spesifikasi & Fitur Detail
304 Spring Wire - Tensile Strength Over Hardness Numbers Product Introduction TOPONE supplies 304 stainless steel spring wire in 0.15-12 mm diameters, delivered in the standard drawn tempers of EN 10270-3 and tested by tensile strength - not by hardness. This page explains why tensile testing is the correct acceptance method for spring wire and how to compare hardness figures correctly when a drawing calls for them. Product Specifications Parameter Specification Grade 304
Produk Terkait

Kawat Pegas Halus 302 - Uji Torsi sebagai Gerbang Kualitas

302 Fine Spring Wire - Torsion Test as Quality Gate At 0.2 mm, a surface defect that would be visible on a 2 mm wire is invisible, and an internal inclusion is impossible to see at all. The torsion test exists for exactly this gap. It twists a short length of wire until it breaks and counts the ...

430 Kawat Stainless 0,15-12mm, Zona Makanan Kering

430 Stainless Steel Wire in Food Equipment: Where It Belongs 430 appears in food plants far more often than its reputation suggests, but it appears in specific places: dry contact zones, non-acidic products, and areas cleaned with water rather than chlorinated or acidic agents. The reason is the ...

Kawat Stainless Tahan Korosi 0,15-12mm, Anil

Corrosion Resistant Stainless Steel Wire, Annealed 0.15-12 mm Corrosion resistance is usually discussed as a grade property, but on a finished part it is often a processing property. Cold drawing leaves residual tensile stress in the wire, and that stress is where chloride pitting and stress ...

Kawat Stainless untuk Pembuatan Scrubber 0,15-12mm, Crimp Ready

Stainless Steel Wire for Cleaning Scrubber Manufacturing, 0.15-12 mm A scrubber line runs the wire through a crimping head, then winds the crimped ribbon into a pad. Two things stop that line: diameter drift that jams the crimp rolls, and a temper that varies coil to coil so the crimp depth changes. ...