Annealed Stainless Wire 0.15-12mm, Bend Radius Guide
Annealed Stainless Wire 0.15-12mm, Bend Radius Guide
Basiseigenschappen
Plaats van herkomst:
China
Merknaam:
Toponewire
Certificering:
ISO9001:2015
Modelnummer:
201/302/304/316/316L
Handelseigendommen
Minimale bestelhoeveelheid:
500KG
Betalingsvoorwaarden:
D/P, L/C, T/T
Productoverzicht
Minimum Bend Radius on Annealed Stainless Wire: A Practical Guide When a drawing specifies a bend, the question behind it is usually whether the wire will crack at that radius. The answer depends on three things: wire diameter, the tensile band of the coil, and where surface defects sit relative to ...
Product aangepaste attributen
Markeren
Annealed stainless wire 0.15-12mm
,Bend radius guide stainless wire
,Stainless steel annealed wire
Materiaal:
Roestvrij staal
Diameter:
0.1512mm
Verpakking:
door klantenverzoek
Standaard:
JIS G. EN. ASTM. DIN. GB enz.
Oppervlak:
Helder of Zeep cotaed
Levering vermogen:
>500 ton per maand
Productbeschrijving
Gedetailleerde specificaties en kenmerken
Minimum Bend Radius on Annealed Stainless Wire: A Practical Guide When a drawing specifies a bend, the question behind it is usually whether the wire will crack at that radius. The answer depends on three things: wire diameter, the tensile band of the coil, and where surface defects sit relative to the outside of the bend. As practical guidance for annealed 304 and 316L, an inner radius of one wire diameter (R = 1d) is achievable on a 180 degree bend. Tighter radii are
Gerelateerde producten
