Annealed Stainless Wire 0.15-12mm, Bend Radius Guide
Annealed Stainless Wire 0.15-12mm, Bend Radius Guide
Propriétés de base
Lieu d'origine:
Chine
Nom de la marque:
Toponewire
Attestation:
ISO9001:2015
Numéro de modèle:
201/302/304/316/316L
Propriétés commerciales
Quantité minimum de commande:
500KG
Conditions de paiement:
D/P,L/C,T/T
Résumé du produit
Minimum Bend Radius on Annealed Stainless Wire: A Practical Guide When a drawing specifies a bend, the question behind it is usually whether the wire will crack at that radius. The answer depends on three things: wire diameter, the tensile band of the coil, and where surface defects sit relative to ...
Attributs personnalisés du produit
Mettre en évidence
Annealed stainless wire 0.15-12mm
,Bend radius guide stainless wire
,Stainless steel annealed wire
Matériel:
Acier inoxydable
Diamètre:
0.15-12mm
Emballage:
par demande de client
Standard:
EN DE JIS G. ASTM. DIN. Gigaoctet etc.
Surface:
Lumineux ou savon cotaed
Capacité d'approvisionnement:
>500 tonnes par mois
Description du produit
Spécifications détaillées et caractéristiques
Minimum Bend Radius on Annealed Stainless Wire: A Practical Guide When a drawing specifies a bend, the question behind it is usually whether the wire will crack at that radius. The answer depends on three things: wire diameter, the tensile band of the coil, and where surface defects sit relative to the outside of the bend. As practical guidance for annealed 304 and 316L, an inner radius of one wire diameter (R = 1d) is achievable on a 180 degree bend. Tighter radii are
Produits connexes
