Annealed Stainless Wire 0.15-12mm, Bend Radius Guide
Annealed Stainless Wire 0.15-12mm, Bend Radius Guide
基本特性
原産地:
中国
ブランド名:
Toponewire
認証:
ISO9001:2015
モデル番号:
201/302/304/316/316L
取引プロパティ
最低注文数量:
500KG
支払い条件:
D/P、L/C、T/T
製品概要
Minimum Bend Radius on Annealed Stainless Wire: A Practical Guide When a drawing specifies a bend, the question behind it is usually whether the wire will crack at that radius. The answer depends on three things: wire diameter, the tensile band of the coil, and where surface defects sit relative to ...
製品カスタム属性
ハイライト
Annealed stainless wire 0.15-12mm
,Bend radius guide stainless wire
,Stainless steel annealed wire
材料:
ステンレス鋼
直径:
0.15-12mm
パッキング:
顧客の要求によって
標準:
JIS G. EN。ASTM.DIN.GB等
表面:
cotaed明るいまたは石鹸
供給の能力:
>1ヶ月あたりの500トン
製品説明
詳細な仕様と特徴
Minimum Bend Radius on Annealed Stainless Wire: A Practical Guide When a drawing specifies a bend, the question behind it is usually whether the wire will crack at that radius. The answer depends on three things: wire diameter, the tensile band of the coil, and where surface defects sit relative to the outside of the bend. As practical guidance for annealed 304 and 316L, an inner radius of one wire diameter (R = 1d) is achievable on a 180 degree bend. Tighter radii are
関連製品
