Annealed Stainless Wire 0.15-12mm, Bend Radius Guide
Annealed Stainless Wire 0.15-12mm, Bend Radius Guide
기본 속성
원산지:
중국
브랜드 이름:
Toponewire
인증:
ISO9001:2015
모델 번호:
201/302/304/316/316L
거래 자산
최소 주문 수량:
500KG
지불 조건:
D/P,L/C,T/T
제품 요약
Minimum Bend Radius on Annealed Stainless Wire: A Practical Guide When a drawing specifies a bend, the question behind it is usually whether the wire will crack at that radius. The answer depends on three things: wire diameter, the tensile band of the coil, and where surface defects sit relative to ...
제품 맞춤 속성
강조하다
Annealed stainless wire 0.15-12mm
,Bend radius guide stainless wire
,Stainless steel annealed wire
재료:
스테인레스 스틸
지름:
0.15-12mm
포장:
고객 요청에 의해
기준:
JIS G. EN. ASTM. DIN. GB 기타 등등
표면:
헤드라이트 또는 Soap 코트아에드
공급 능력:
달 당 >500 톤
제품 설명
세부 사양 및 특징
Minimum Bend Radius on Annealed Stainless Wire: A Practical Guide When a drawing specifies a bend, the question behind it is usually whether the wire will crack at that radius. The answer depends on three things: wire diameter, the tensile band of the coil, and where surface defects sit relative to the outside of the bend. As practical guidance for annealed 304 and 316L, an inner radius of one wire diameter (R = 1d) is achievable on a 180 degree bend. Tighter radii are
관련 제품
