logo
86-574-88328001
IN

304H Spring Wire - Modulus of Elasticity in Spring Design

304H Spring Wire - Modulus of Elasticity in Spring Design
Properti Dasar
Tempat Asal: Tiongkok
Nama Merek: TOPONE
Sertifikasi: ISO/SGS/RosH
Nomor Model: 304h
Properti Perdagangan
Jumlah Pesanan Minimum: 1000kg
Harga: Bisa dinegosiasikan
Ketentuan Pembayaran: T/T,L/C
Kemampuan Pasokan: > 1000 ton per bulan
Tag:

Kawat Baja Tahan Karat

kawat pegas ss

gulungan kawat ss
Ringkasan Produk
Kawat pegas tahan karat 304H dengan E sekitar 193 GPa dan G sekitar 77 GPa untuk laju pegas yang dihitung, 0,04% C min- untuk suhu tinggi. ASTM A580 / EN 10270-3, 0,15-12mm.
Atribut Kustom Produk
Menyoroti

304H stainless spring wire

,

high modulus spring wire

,

stainless steel spring design

Sertifikasi:
ISO,SGS,Rosh
Aplikasi:
SPRING/SCREW/WIRE Form/Fishing
Diameter:
0,15-12mm
Bahan:
AISI 304H
Permukaan:
Dilapisi Bright/Soap
Nama Produk:
1.8mm 304H sabun berlapis sabun/ stainless steel kawat pegas
Jenis:
Keras/lembut
Sedang mengemas:
gulungan, kumparan
Deskripsi Produk
Spesifikasi & Fitur Detail
304H Spring Wire - Modulus of Elasticity in Spring Design Product Introduction TOPONE supplies 304H stainless steel spring wire in 0.15-12 mm diameters for springs that must hold a calculated force over time and temperature. Because the H grade carries a guaranteed 0.04 percent minimum carbon, its strength is stable at elevated temperature - and its elastic modulus, the property that sets spring stiffness, stays predictable. Tempers and surfaces are arranged per order.
Produk Terkait

Micro Spring Wire - Precision Spool Winding, Tidak Ada Tangles

Micro Spring Wire on Precision Wound Spools for Tangle-Free Pay-Off Product Introduction Below about 0.5 mm, wire stops behaving like wire and starts behaving like thread. It will not push, it will not straighten itself, and if one turn crosses another on the spool it pulls a loop instead of feeding...

302 Kawat pegas - Ovalasi dan Konsistensi Diameter

302 Spring Wire - Ovality and Diameter Consistency A diameter tolerance says how far the wire may sit from nominal. It does not say whether the cross section is round. A wire measuring 0.80 mm on one axis and 0.76 mm on the other can pass a tolerance of plus or minus 0.02 mm on both readings and ...

Kawat Stainless 0,15-12mm, Sertifikat Uji Pabrik 3.1

430 Stainless Steel Wire and the Mill Test Report: Reading Each Value A mill test report is usually filed without being read. On 430 that is a missed opportunity, because the three things that decide how the coil behaves at the press and how the part behaves in service - carbon level, chromium level ...

Kawat Stainless Anil Lembut 0,15-12mm, Kontrol Annealing

Annealing Control: Why Two Soft Coils Can Feel Different Two coils can both be labelled annealed, both sit inside 550-750 N/mm2, and still behave differently at the press. The reason is that "soft" is a range, and where a coil sits inside that range is decided by the annealing practice rather than ...