302 Stainless Wire - Shot Peening and Residual Stress
302 Stainless Wire - Shot Peening and Residual Stress
Properti Dasar
Tempat Asal:
Tiongkok
Nama Merek:
TOPONE
Sertifikasi:
ISO9001:2015
Nomor Model:
302CHQ, 304HQ, 304 dan 430
Properti Perdagangan
Jumlah Pesanan Minimum:
1000kg
Harga:
Bisa dinegosiasikan
Ketentuan Pembayaran:
T/T,L/C,D/A,D/P,
Kemampuan Pasokan:
> 10000KGS per minggu
Ringkasan Produk
302 Stainless Wire - Shot Peening and Residual Stress A spring almost always fails by fatigue, and fatigue almost always starts at the surface. That single fact explains why shot peening, a process that does not change the material or the dimensions at all, can multiply the life of a part. Peening ...
Atribut Kustom Produk
Menyoroti
302 stainless shot peening wire
,stainless steel cold heading wire
,302 wire residual stress control
Bahan:
302CHQ, 304HQ, 304 dan 430
Permukaan:
terang
dlameter:
0,15mm-12mm
Koil diameter dalam:
250-1000mm
Standar:
JIS G. EN. JIS G.EN. ASTM. ASTM. DIN. KERIUHAN. GB etc<
Sedang mengemas:
Coil atau kemasan khusus dengan plat
Status:
lunak, setengah lunak
Deskripsi Produk
Spesifikasi & Fitur Detail
302 Stainless Wire - Shot Peening and Residual Stress A spring almost always fails by fatigue, and fatigue almost always starts at the surface. That single fact explains why shot peening, a process that does not change the material or the dimensions at all, can multiply the life of a part. Peening puts a thin layer of the surface into compression, and a crack cannot open while the material around it is being pushed together. It is a well established process with equally well
Produk Terkait
