302 Stainless Wire - Shot Peening and Residual Stress
302 Stainless Wire - Shot Peening and Residual Stress
Propriétés de base
Lieu d'origine:
Chine
Nom de la marque:
TOPONE
Attestation:
ISO9001:2015
Numéro de modèle:
302CHQ, 304HQ, 304 et 430
Propriétés commerciales
Quantité minimum de commande:
1000kg
Prix:
Négociable
Conditions de paiement:
T/T, L/C, D/A, D/P,
Capacité d'approvisionnement:
>10000KGS par semaine
Résumé du produit
302 Stainless Wire - Shot Peening and Residual Stress A spring almost always fails by fatigue, and fatigue almost always starts at the surface. That single fact explains why shot peening, a process that does not change the material or the dimensions at all, can multiply the life of a part. Peening ...
Attributs personnalisés du produit
Mettre en évidence
302 stainless shot peening wire
,stainless steel cold heading wire
,302 wire residual stress control
Matériel:
302CHQ, 304HQ, 304 et 430
Surface:
brillant
dlameter:
0.15mm-12mm
Diamètre intérieur de la bobine:
250-1000mm
Standard:
EN DE JIS G. ASTM. DIN. Gigaoctet etc.
Emballage:
Bobine ou emballage spécial avec le plat
Statut:
doux, mi-doux
Description du produit
Spécifications détaillées et caractéristiques
302 Stainless Wire - Shot Peening and Residual Stress A spring almost always fails by fatigue, and fatigue almost always starts at the surface. That single fact explains why shot peening, a process that does not change the material or the dimensions at all, can multiply the life of a part. Peening puts a thin layer of the surface into compression, and a crack cannot open while the material around it is being pushed together. It is a well established process with equally well
Produits connexes
