logo
86-574-88328001
GE

Thread Insert Wire - Why the Diamond Section Matters

Thread Insert Wire - Why the Diamond Section Matters
Grundlegende Eigenschaften
Herkunftsort: China
Markenname: Topone
Zertifizierung: ASTM
Modellnummer: 304, 304L, 316, 316L, 430
Handelsimmobilien
Mindestbestellmenge: 100 Punkte
Zahlungsbedingungen: L/c, t/t, d/a
Schlagworte:

Torsionsfedern

DRAHT-FORM

Drahtbiegeverlängerung
Produktübersicht
Gewindeeinsatzdraht, der auf einen präzisen Diamantabschnitt für Spiraleinsätze gezogen wird: korrekte Verriegelung und Spiel, 304/316, Profiltoleranz gemäß Zeichnung, 3,1 MTC.
Produktanpassungsattribute
Hervorheben

thread insert wire diamond section

,

wire forming diamond section insert

,

thread insert wire forming tool

Anwendung:
Flachdraht aus Edelstahl
Temperaturbeständigkeit:
Hoch
Verwendung:
Verschiedene Anwendungen
Material:
Edelstahl
Durchmesser:
0,15 mm - 12 mm
Artikel:
mit einer Breite von mehr als 20 mm
Länge:
Maßgeschneidert
Produktbeschreibung
Detaillierte Spezifikationen & Funktionen
Thread Insert Wire - Why the Diamond Section Matters Product Introduction TOPONE draws stainless steel profile wire for helical thread inserts (wire thread inserts, Helicoil type). What looks like a simple round wire is in fact a precision diamond-shaped section: two flanks that form the internal thread and two edges that lock into the parent thread. The geometry of that section decides whether the finished insert grips, floats and threads smoothly. Grades 304 and 316, drawn
Verwandte Produkte

302 Edelstahl Draht - Chargenkonsistenz und Cpk-Kontrolle

302 Stainless Wire - Batch Consistency and Cpk Control Two deliveries of the same grade at the same diameter can both be inside specification and still cause different problems, because a specification sets limits and does not describe the distribution inside them. One lot may run tightly around the ...

302 Federdraht - Ziehwerkzeugmaterial und Oberfläche

302 Spring Wire - Drawing Die Material and Surface Two suppliers can draw the same rod down to 1.4 mm in 302 and deliver wire that looks the same on a certificate but differs on the surface. The difference is usually the die: which material it was made from, how long it has run, and whether the ...

Edelstahldraht 0,15-12 mm, bis in die Länge geschnitten und abgebrochen

Cut-to-Length Stainless Wire: Tolerance, Ends and Straightness Buying wire by length instead of by coil moves three problems from the customer's shop to the supplier's: the cut tolerance, the condition of the two ends, and whether the piece is still straight when it arrives. All three have to be ...

Edelstahldraht 0,15–12 mm, Mühlentestzertifikat 3.1

430 Stainless Steel Wire and the Mill Test Report: Reading Each Value A mill test report is usually filed without being read. On 430 that is a missed opportunity, because the three things that decide how the coil behaves at the press and how the part behaves in service - carbon level, chromium level ...