logo

304l bending springs

63 Items Found

Quality Corrosion Resistant Stainless Steel Straight Wire for Industrial Use factory

Corrosion Resistant Stainless Steel Straight Wire for Industrial Use

Corrosion Resistant Stainless Steel Straight Wire for Industrial Use Product Introduction TOPONE stainless steel straight wire is designed for industrial fabrication, forming, bending and component manufacturing applications requiring a defined stainless steel grade, wire diameter and straight wire ...

Check the Details
Quality 200 Series 201 / 202 Stainless Steel Annealed Wire | Soft Tie Wire Manufacturer In Stock factory

200 Series 201 / 202 Stainless Steel Annealed Wire | Soft Tie Wire Manufacturer In Stock

200 Series 201 / 202 Stainless Steel Annealed Wire | Soft Tie Wire Manufacturer In Stock TOPONE is a professional stainless steel wire manufacturer with over 30 years of manufacturing experience, supplying high-quality 201 and 202 stainless steel annealed wire to customers worldwide. Manufactured ...

Check the Details
Quality AISI 430 Stainless Steel Straight Wire for Custom Applications factory

AISI 430 Stainless Steel Straight Wire for Custom Applications

AISI 430 Stainless Steel Straight Wire for Custom Applications Product Introduction TOPONE AISI 430 stainless steel straight wire is designed for applications requiring stainless steel wire in a straightened form for further forming, fabrication, assembly or component production. The wire is ...

Check the Details
Quality 430 Stainless Scourer Wire 0.15-12mm for Stable Knitting factory

430 Stainless Scourer Wire 0.15-12mm for Stable Knitting

AISI 430 Stainless Scourer Wire for Fine Forming, 0.15-12 mm Scourer wire is bought on diameter consistency rather than on a headline property. A needle on a scourer knitting machine accepts a narrow band, and a spool that drifts forces the operator to reset tension mid-run. AISI 430, a ferritic ...

Check the Details
Quality Stainless Wire 0.15-12mm, Surface Defects and Limits factory

Stainless Wire 0.15-12mm, Surface Defects and Limits

Surface Defects on Stainless Wire: Naming Them and Setting Limits Surface quality is one of the few wire properties still agreed in words rather than numbers. That is where most disputes come from: two parties say "good surface" and mean two different things, and the argument only starts after the ...

Check the Details
Quality Stainless Wire 0.15-12mm, Welding and Post-Weld Finish factory

Stainless Wire 0.15-12mm, Welding and Post-Weld Finish

Welding Stainless Steel Wire: Grade, Heat Input and What Comes After Welding wire is usually discussed as a filler question. On stainless wire it is three decisions instead: the carbon level of the wire, the heat input at the joint, and what happens to the surface after the arc stops. Get the grade ...

Check the Details
Quality Annealed Stainless Steel Wire - High Elongation for Forming factory

Annealed Stainless Steel Wire - High Elongation for Forming

Soft annealed stainless steel wire with over 40% elongation (A50) for bending, coiling, mesh and redrawing. 0.15-12 mm, 302/304/316/430, ASTM A580 / EN 10270-3.

Check the Details
Quality 2.4mm 304/316 Stainless Steel Wire for Precision Forming factory

2.4mm 304/316 Stainless Steel Wire for Precision Forming

2.4mm 304/316 Stainless Steel Wire for Precision Forming Product Introduction TOPONE 2.4mm 304/316 stainless steel wire is manufactured for industrial forming, spring components, wire forms and other applications requiring controlled wire dimensions and suitable surface conditions. The product range ...

Check the Details
Quality Fine Stainless Wire - Strength and Ductility in Balance factory

Fine Stainless Wire - Strength and Ductility in Balance

Fine stainless wire to 0.15 mm with temper balanced for weaving, springs and redrawing. +/-0.003 mm tolerance, layer-wound spools, strength and elongation per lot.

Check the Details