logo

304l bending springs

63 العناصر المكتشفة

جودة سلك مستقيم من الفولاذ المقاوم للصدأ مقاوم للتآكل للاستخدام الصناعي مصنع

سلك مستقيم من الفولاذ المقاوم للصدأ مقاوم للتآكل للاستخدام الصناعي

Corrosion Resistant Stainless Steel Straight Wire for Industrial Use Product Introduction TOPONE stainless steel straight wire is designed for industrial fabrication, forming, bending and component manufacturing applications requiring a defined stainless steel grade, wire diameter and straight wire ...

تحقق من التفاصيل
جودة 200 سلسلة 201/202 أسلاك الفولاذ المقاوم للصدأ الملدنة | الشركة المصنعة لأسلاك التعادل الناعمة في المخزون مصنع

200 سلسلة 201/202 أسلاك الفولاذ المقاوم للصدأ الملدنة | الشركة المصنعة لأسلاك التعادل الناعمة في المخزون

200 Series 201 / 202 Stainless Steel Annealed Wire | Soft Tie Wire Manufacturer In Stock TOPONE is a professional stainless steel wire manufacturer with over 30 years of manufacturing experience, supplying high-quality 201 and 202 stainless steel annealed wire to customers worldwide. Manufactured ...

تحقق من التفاصيل
جودة AISI 430 سلك مستقيم من الفولاذ المقاوم للصدأ للتطبيقات المخصصة مصنع

AISI 430 سلك مستقيم من الفولاذ المقاوم للصدأ للتطبيقات المخصصة

AISI 430 Stainless Steel Straight Wire for Custom Applications Product Introduction TOPONE AISI 430 stainless steel straight wire is designed for applications requiring stainless steel wire in a straightened form for further forming, fabrication, assembly or component production. The wire is ...

تحقق من التفاصيل
جودة سلك ستانلس ستيل 430 0.15-12 مم للحياكة المستقرة مصنع

سلك ستانلس ستيل 430 0.15-12 مم للحياكة المستقرة

AISI 430 Stainless Scourer Wire for Fine Forming, 0.15-12 mm Scourer wire is bought on diameter consistency rather than on a headline property. A needle on a scourer knitting machine accepts a narrow band, and a spool that drifts forces the operator to reset tension mid-run. AISI 430, a ferritic ...

تحقق من التفاصيل
جودة سلك مقاوم للصدأ 0.15-12 مم، عيوب السطح وحدوده مصنع

سلك مقاوم للصدأ 0.15-12 مم، عيوب السطح وحدوده

Surface Defects on Stainless Wire: Naming Them and Setting Limits Surface quality is one of the few wire properties still agreed in words rather than numbers. That is where most disputes come from: two parties say "good surface" and mean two different things, and the argument only starts after the ...

تحقق من التفاصيل
جودة سلك مقاوم للصدأ 0.15-12 مم، لحام ولمسة نهائية بعد اللحام مصنع

سلك مقاوم للصدأ 0.15-12 مم، لحام ولمسة نهائية بعد اللحام

Welding Stainless Steel Wire: Grade, Heat Input and What Comes After Welding wire is usually discussed as a filler question. On stainless wire it is three decisions instead: the carbon level of the wire, the heat input at the joint, and what happens to the surface after the arc stops. Get the grade ...

تحقق من التفاصيل
جودة أسلاك الفولاذ المقاوم للصدأ الملدنة - استطالة عالية للتشكيل مصنع

أسلاك الفولاذ المقاوم للصدأ الملدنة - استطالة عالية للتشكيل

أسلاك الفولاذ المقاوم للصدأ الملدنة الناعمة مع استطالة تزيد عن 40% (A50) للثني واللف والشبك وإعادة الرسم. 0.15-12 ملم، 302/304/316/430، ASTM A580 / EN 10270-3.

تحقق من التفاصيل
جودة سلك من الفولاذ المقاوم للصدأ 2.4 مم 304/316 للتشكيل الدقيق مصنع

سلك من الفولاذ المقاوم للصدأ 2.4 مم 304/316 للتشكيل الدقيق

2.4mm 304/316 Stainless Steel Wire for Precision Forming Product Introduction TOPONE 2.4mm 304/316 stainless steel wire is manufactured for industrial forming, spring components, wire forms and other applications requiring controlled wire dimensions and suitable surface conditions. The product range ...

تحقق من التفاصيل
جودة سلك رفيع مقاوم للصدأ - القوة والليونة في التوازن مصنع

سلك رفيع مقاوم للصدأ - القوة والليونة في التوازن

سلك رفيع مقاوم للصدأ يصل سمكه إلى 0.15 مم مع مزاج متوازن للنسيج والينابيع وإعادة الرسم. +/- 0.003 مم، بكرات ملفوفة بطبقة، القوة والاستطالة لكل قطعة.

تحقق من التفاصيل