304 Stainless Steel Wire Forming Spring for EH12 Clutch

Product Introduction

TOPONE supplies 304 stainless steel wire forming springs for EH12 clutch applications. Designed for specific mechanical assemblies, these custom-formed components can be manufactured according to technical drawings, samples or dimensional requirements.

Made from AISI 304 stainless steel, the spring can be customized in wire diameter, overall dimensions, bending geometry and mounting features to suit the intended assembly. The available wire diameter range is 0.15–12 mm, with final dimensions determined by the product design.

For clutch components, wire diameter alone does not determine spring performance. Spring geometry, material condition, working stroke, load requirements and installation space should be considered together during specification.

Product Specifications

Final material specifications, dimensional tolerances, surface requirements and inspection criteria should be confirmed before production.

Why Choose 304 Stainless Steel for Wire Forming Springs?

Defined Material Grade

AISI 304 stainless steel is commonly used in mechanical components and formed-wire products. Its suitability for a particular clutch application depends on the operating environment, mechanical loads and required service conditions.

Custom Spring Geometry

Unlike standard coil springs, wire forming springs can incorporate bends, loops, mounting sections and other shapes required by the assembly. These features can be developed according to the customer's drawing or sample.

Flexible Wire Diameter Selection

The available 0.15–12 mm range provides options for different wire-forming designs. The correct diameter depends on the required geometry, available space, spring force and working movement.

Application: EH12 Clutch Components

A wire forming spring used in a clutch assembly must fit the designated installation position and perform its intended mechanical function.

Key design parameters may include:

• Wire diameter and material grade

• Overall length and width

• Bend angles and forming positions

• Coil diameter, where applicable

• Free length and mounting points

• Required spring force and working stroke

• Dimensional tolerances

• Operating temperature and environmental exposure

Providing a technical drawing or physical sample helps clarify these requirements before production.

Product Advantages

1. Customized Wire Forming

The spring shape can be developed according to the required assembly geometry instead of being restricted to a standard configuration.

2. Specified Stainless Steel Material

AISI 304 is the listed material for this product. Material requirements should be confirmed against the customer's technical specification.

3. Multiple Diameter Options

The 0.15–12 mm available wire diameter range supports a variety of wire-forming designs, subject to the requirements of the finished component.

4. Drawing-Based Manufacturing

Customers can provide drawings, samples or dimensional specifications to define the required shape, mounting features and critical measurements.

5. Surface Finish Options

Bright or soap-coated wire may be considered according to processing requirements. The final surface condition should be agreed upon for the finished spring and its intended application.

How to Specify a Custom Clutch Spring

Step 1: Confirm the Material

Specify AISI 304 or provide an alternative material requirement if the application calls for a different grade.

Step 2: Define Dimensions

Provide the wire diameter, overall dimensions, bend positions, coil dimensions if applicable, and critical tolerances.

Step 3: Explain the Mechanical Requirements

Where available, include the required spring force, working stroke, load conditions and installation position. These details help determine whether the proposed geometry meets the intended function.

Step 4: Provide a Drawing or Sample

A drawing or physical sample can reduce uncertainty about the shape, connection points and assembly fit.

Step 5: Confirm Surface and Inspection Requirements

Specify the required surface condition and any material documentation, dimensional checks or performance tests required for acceptance.

Quality Control Considerations

For a custom wire forming spring, inspection should be based on the approved drawing and agreed technical specification.

Relevant checks may include:

• Material grade and supporting documentation

• Wire diameter

• Overall dimensions and forming geometry

• Critical bend positions and mounting features

• Surface condition

• Spring force or functional testing, where specified

The inspection plan should identify the required tolerances and acceptance criteria before production.

Frequently Asked Questions

Can the EH12 clutch spring be customized?

Yes. The spring can be specified according to a technical drawing, sample or dimensional requirements. Final design details should be confirmed before production.

What material is used for this spring?

The listed material is AISI 304 stainless steel.

What wire diameter range is available?

The available range is 0.15–12 mm. The suitable diameter depends on the finished component's design and mechanical requirements.

What information is needed for a quotation?

A drawing or sample is preferred. If neither is available, provide the material grade, wire diameter, overall dimensions, spring shape, order quantity and any known force or working-stroke requirements.

Is wire diameter enough to determine spring performance?

No. Spring performance also depends on material condition, geometry, working movement and loading conditions. These details should be reviewed together.