logo
86-574-88328001
IT

Fine Stainless Wire - Strength and Ductility in Balance

Fine Stainless Wire - Strength and Ductility in Balance
Proprietà di base
Luogo d'origine: Cina
Marchio: TOPONEwire
Certificazione: ISO9001
Numero di modello: 201/302/304/316/316L
Proprietà commerciali
Quantità minima di ordine: 500KG
Termini di pagamento: L/C, T/T
Capacità di fornitura: >500 tonnellate al mese
Tag:

filo morbido in acciaio inossidabile

Filo fine in acciaio inossidabile

Filo di acciaio degli ss
Riepilogo Prodotto
Filo inossidabile fino a 0,15 mm con temperamento bilanciato per tessitura, molle e trafilatura. Tolleranza +/- 0,003 mm, bobine avvolte a strati, resistenza e allungamento per lotto.
Attributi personalizzati del prodotto
Evidenziare

Fine stainless steel wire high strength

,

Fine stainless wire ductility balance

,

Fine stainless steel wire corrosion resistant

Materiale:
Acciaio inossidabile
Diametro:
0.15-12mm
Imballaggio:
Bobina o bobina con il pallet
Superficie:
Luminoso o sapone cotaed
Standard:
JIS G. EN10270-3. ASTM.DIN.GB ecc
Descrizione del prodotto
Specifiche e Caratteristiche Dettagliate
Fine Stainless Wire - Strength and Ductility in Balance Product Introduction TOPONE draws fine stainless steel wire down to 0.15 mm for weaving, braiding, medical devices, filtration and precision springs. Below roughly 1 mm, the usual trade-off between strength and ductility stops being a datasheet detail and becomes the deciding factor: too soft and the wire snags or kinks on the machine, too hard and it breaks on the bobbin. This page explains how we balance the two and
Prodotti correlati

Filo per molle in acciaio inossidabile 201: riduzione dello stress dopo l'avvolgimento

201 Stainless Spring Wire for Coils That Hold Their Load After Stress Relief Product Introduction A spring that is coiled and shipped without stress relief is a spring that will change shape on the customer's bench. Coiling leaves residual stress locked into every turn, and that stress relaxes over ...

Filo inossidabile 0,15-12 mm, certificato di prova del mulino 3.1

430 Stainless Steel Wire and the Mill Test Report: Reading Each Value A mill test report is usually filed without being read. On 430 that is a missed opportunity, because the three things that decide how the coil behaves at the press and how the part behaves in service - carbon level, chromium level ...

Filo inossidabile da 0,15-12 mm, controllo della tolleranza del diametro

Stainless Steel Wire Diameter Tolerance and How It Is Measured Diameter is the one number on a wire purchase order that both sides assume is understood, and it is also the one that causes most disputes. A tolerance band quoted without a measuring method can be met by one instrument and missed by ...

Filo inossidabile magnetico 430 da 3 mm 0,15-12 mm per formatura

3mm 430 Annealed Stainless Steel Wire for Formed Frames 430 is a ferritic stainless grade: 16-18% chromium, no nickel, magnetic, and cheaper than 304 at the same diameter. For formed frames on dry-service products it does the job. What it will not do is hold up in chloride or marine exposure, or ...