logo
86-574-88328001
FR

Fine Stainless Wire - Strength and Ductility in Balance

Fine Stainless Wire - Strength and Ductility in Balance
Propriétés de base
Lieu d'origine: Chine
Nom de la marque: TOPONEwire
Attestation: ISO9001
Numéro de modèle: 201/302/304/316/316L
Propriétés commerciales
Quantité minimum de commande: 500KG
Conditions de paiement: LC, T/T
Capacité d'approvisionnement: >500 tonnes par mois
Les étiquettes:

fil d'acier inoxydable souple

Fil d'acier inoxydable fin

Fil d'acier de solides solubles
Résumé du produit
Fil inoxydable fin jusqu'à 0,15 mm à trempe équilibrée pour le tissage, les ressorts et le tréfilage. Tolérance de +/-0,003 mm, bobines enroulées en couches, résistance et allongement par lot.
Attributs personnalisés du produit
Mettre en évidence

Fine stainless steel wire high strength

,

Fine stainless wire ductility balance

,

Fine stainless steel wire corrosion resistant

Matériel:
Acier inoxydable
Diamètre:
0.15-12mm
Emballage:
Bobine ou bobine avec la palette
Surface:
Lumineux ou savon cotaed
Standard:
JIS G. EN10270-3. ASTM.DIN.GB etc.
Description du produit
Spécifications détaillées et caractéristiques
Fine Stainless Wire - Strength and Ductility in Balance Product Introduction TOPONE draws fine stainless steel wire down to 0.15 mm for weaving, braiding, medical devices, filtration and precision springs. Below roughly 1 mm, the usual trade-off between strength and ductility stops being a datasheet detail and becomes the deciding factor: too soft and the wire snags or kinks on the machine, too hard and it breaks on the bobbin. This page explains how we balance the two and
Produits connexes

302 Fil à ressort - Pourquoi le fil inoxydable montre des taches de rouille

302 Spring Wire - Why Stainless Wire Shows Rust Spots Every few months a customer reports that the stainless wire has arrived rusty, and almost every time the cause is not the wire. Three different mechanisms produce a brown mark on 302 spring wire, and only one of them is a material problem. ...

302 fil d'acier à ressort - moulé et hélicoïdal pour alimentation automatique

302 Spring Wire - Cast and Helix for Auto Feeding Cast and helix are the two descriptions of coil shape that appear on almost every spring wire specification and are ignored on almost every purchase order. They decide whether a coil feeds smoothly into an automatic coiler, whether the wire tangles ...

Fil d'acier inoxydable 0,15-12 mm, coupé à la longueur et ébavuré

Cut-to-Length Stainless Wire: Tolerance, Ends and Straightness Buying wire by length instead of by coil moves three problems from the customer's shop to the supplier's: the cut tolerance, the condition of the two ends, and whether the piece is still straight when it arrives. All three have to be ...

Fil inoxydable résistant à la corrosion 0,15-12 mm, recuit

Corrosion Resistant Stainless Steel Wire, Annealed 0.15-12 mm Corrosion resistance is usually discussed as a grade property, but on a finished part it is often a processing property. Cold drawing leaves residual tensile stress in the wire, and that stress is where chloride pitting and stress ...