logo
86-574-88328001
IT

Annealed Stainless Steel Wire - High Elongation for Forming

Annealed Stainless Steel Wire - High Elongation for Forming
Proprietà di base
Luogo d'origine: Cina
Marchio: TOPONE
Certificazione: ROHS， ISO
Numero di modello: 200/300 di serie
Proprietà commerciali
Quantità minima di ordine: 200KG
Tag:

Bobina del cavo di acciaio inossidabile

filo ricotto brillante

ss bobina di filo
Riepilogo Prodotto
Filo di acciaio inossidabile ricotto dolce con allungamento superiore al 40% (A50) per piegatura, avvolgimento, mesh e trafilatura. 0,15-12 mm, 302/304/316/430, ASTM A580 / EN 10270-3.
Attributi personalizzati del prodotto
Evidenziare

Annealed stainless steel wire high elongation

,

Stainless steel annealed wire for forming

,

Annealed stainless steel wire forming use

Resistenza alla trazione:
Personalizzato
Imballaggio:
Spirale, bobina, tamburo
Peso della bobina:
Personalizzato
Applicazione:
Apparecchi da cucina, primavera, costruzioni
Lunghezza:
Personalizzato
Tipo:
cavo temprato
Diametro:
0.15-12mm
Allungamento:
Personalizzato
Descrizione del prodotto
Specifiche e Caratteristiche Dettagliate
Annealed Stainless Steel Wire - High Elongation for Forming Product Introduction TOPONE supplies annealed stainless steel wire in 0.15-12 mm diameters for bending, coiling, weaving and redrawing operations that need maximum ductility. The soft annealed condition gives elongation values above 40 percent (A50 gauge), so the wire takes tight bends and deep forms without surface cracking. Tempers, coil weights and surfaces are arranged per order. Product Specifications Parameter
Prodotti correlati

302 Filo per Molle - Prova di Torsione come Gate di Qualità

302 Fine Spring Wire - Torsion Test as Quality Gate At 0.2 mm, a surface defect that would be visible on a 2 mm wire is invisible, and an internal inclusion is impossible to see at all. The torsion test exists for exactly this gap. It twists a short length of wire until it breaks and counts the ...

Filo inossidabile da 0,15-12 mm, controllo della tolleranza del diametro

Stainless Steel Wire Diameter Tolerance and How It Is Measured Diameter is the one number on a wire purchase order that both sides assume is understood, and it is also the one that causes most disputes. A tolerance band quoted without a measuring method can be met by one instrument and missed by ...

Filo inossidabile ricotto morbido 0,15-12 mm, controllo della ricottura

Annealing Control: Why Two Soft Coils Can Feel Different Two coils can both be labelled annealed, both sit inside 550-750 N/mm2, and still behave differently at the press. The reason is that "soft" is a range, and where a coil sits inside that range is decided by the annealing practice rather than ...

Filo inossidabile 430 da 0,15-12 mm per calore e cicli termici

430 Stainless Steel Wire for Heat Exposure and Thermal Cycling 430 is often ordered as the cheaper alternative to 304. In parts that cycle between hot and cold, the real reason is different: thermal expansion. 430 is ferritic with a linear expansion coefficient around 10.4 x 10-6 /K, against roughly ...