logo
86-574-88328001
DU

Annealed Stainless Steel Wire - High Elongation for Forming

Annealed Stainless Steel Wire - High Elongation for Forming
Basiseigenschappen
Plaats van herkomst: China
Merknaam: TOPONE
Certificering: ROHS， ISO
Modelnummer: 200/300 Reeks
Handelseigendommen
Minimale bestelhoeveelheid: 200KG
Labels:

De rol van de roestvrij staaldraad

blank gegloeid draad

ss Draden spoel
Productoverzicht
Zachtgegloeid roestvast staaldraad met meer dan 40% rek (A50) voor buigen, oprollen, vlechten en hertrekken. 0,15-12 mm, 302/304/316/430, ASTM A580 / EN 10270-3.
Product aangepaste attributen
Markeren

Annealed stainless steel wire high elongation

,

Stainless steel annealed wire for forming

,

Annealed stainless steel wire forming use

Treksterkte:
Aangepast
Verpakking:
Spoel, spoel, trommel
Gewicht van de spoel:
Aangepast
Sollicitatie:
Keukengerei, voorjaar, bouwwerk
Lengte:
Aangepast
Type:
ontharde draad
Diameter:
0.1512mm
Verlenging:
Aangepast
Productbeschrijving
Gedetailleerde specificaties en kenmerken
Annealed Stainless Steel Wire - High Elongation for Forming Product Introduction TOPONE supplies annealed stainless steel wire in 0.15-12 mm diameters for bending, coiling, weaving and redrawing operations that need maximum ductility. The soft annealed condition gives elongation values above 40 percent (A50 gauge), so the wire takes tight bends and deep forms without surface cracking. Tempers, coil weights and surfaces are arranged per order. Product Specifications Parameter
Gerelateerde producten

304H Spring Wire - Modulus of Elasticity in Spring Design

304H roestvrijstalen veerdraad met E ongeveer 193 GPa en G ongeveer 77 GPa voor berekende veerconstanten, 0,04% C min voor verhoogde temperaturen. ASTM A580 / EN 10270-3, 0,15-12 mm.

302 Veerstaal - Tekenmatrijs Materiaal en Oppervlak

302 Spring Wire - Drawing Die Material and Surface Two suppliers can draw the same rod down to 1.4 mm in 302 and deliver wire that looks the same on a certificate but differs on the surface. The difference is usually the die: which material it was made from, how long it has run, and whether the ...

302 Fijne veerstaaldraad - torsietest als kwaliteitscontrole

302 Fine Spring Wire - Torsion Test as Quality Gate At 0.2 mm, a surface defect that would be visible on a 2 mm wire is invisible, and an internal inclusion is impossible to see at all. The torsion test exists for exactly this gap. It twists a short length of wire until it breaks and counts the ...

302 Zeep-Coated Veerstaal - Veerindex en Belasting

302 Soap-Coated Spring Wire - Spring Index and Load Two springs wound from the same nominal wire can carry different loads at the same deflection. The reason is usually not the grade but geometry: the spring index, and the actual wire diameter inside its tolerance band. Because spring rate depends ...