logo
86-574-88328001
GE

Spiral Spring Handing and End Fixing - Assembly Traps

Spiral Spring Handing and End Fixing - Assembly Traps
Grundlegende Eigenschaften
Herkunftsort: China
Markenname: Topone
Zertifizierung: ASTM
Modellnummer: 304, 304L, 316, 316L, 430
Handelsimmobilien
Mindestbestellmenge: 100 Punkte
Zahlungsbedingungen: L/c, t/t, d/a
Schlagworte:

Torsionsfedern

DRAHT-FORM

Drahtbiegeverlängerung
Produktübersicht
Kundenspezifische Edelstahl-Spiralfedern mit definierter Handhabung und Endbefestigung: gerade, geschlungen oder T-Ende, Dornabstand 0,1–0,3 mm. 0,15–12 mm Draht, 201–430, seit 1993.
Produktanpassungsattribute
Hervorheben

Spiral Spring Assembly Traps

,

Wire Forming End Fixing

,

Spring Handing Assembly Traps

Anwendung:
Flachdraht aus Edelstahl
Temperaturbeständigkeit:
Hoch
Verwendung:
Verschiedene Anwendungen
Material:
Edelstahl
Durchmesser:
0,15 mm - 12 mm
Artikel:
mit einer Breite von mehr als 20 mm
Länge:
Maßgeschneidert
Produktbeschreibung
Detaillierte Spezifikationen & Funktionen
Spiral Spring Handing and End Fixing: Where Assembly Goes Wrong A spiral spring is a simple part with two critical interfaces: how it is wound, and how both ends are held. When a spiral spring fails in the field or a batch is rejected at assembly, the coil itself is rarely the cause. The cause is normally that the spring was wound the wrong way, or that the end fixing was designed without the clearance the spring needs to work. This article sets out the two parameters that
Verwandte Produkte

Idler Spring Wire - Surface Quality vs Torsional Fatigue

Spannfederdraht für Waschmaschinenantriebe, gezogen zur Kontrolle von Oberflächendefekten, Entkohlungstiefe und Eigenspannung und nicht nur zur Zugfestigkeit. Sorten 201–430, 0,15–12 mm, Ra 0,8 um, h9-Toleranz.

302 Edelstahl-Draht - Kugelstrahlen und Eigenspannungen

302 Stainless Wire - Shot Peening and Residual Stress A spring almost always fails by fatigue, and fatigue almost always starts at the surface. That single fact explains why shot peening, a process that does not change the material or the dimensions at all, can multiply the life of a part. Peening ...

Geglühtes Edelstahlprofil-Draht - Korngrößenkontrolle

Annealed Stainless Profile Wire - Grain Size Control Two coils of annealed stainless wire can share the same grade, the same diameter and the same tensile strength, and still behave differently on the same press. The difference is usually grain size. Grain size controls how the metal distributes ...

Edelstahldraht 0,15–12 mm, Washdown- und CIP-Qualität

Washdown and CIP: Choosing Between 304 and 316L Wire In equipment that is cleaned in place, the cleaning agent decides the grade more often than the product does. Two stainless parts can see identical product contact and completely different service life, because one is rinsed with chlorinated foam ...