logo
86-574-88328001
GE

302HQ Cold Heading Wire with Copper for Low Work Hardening

302HQ Cold Heading Wire with Copper for Low Work Hardening
Grundlegende Eigenschaften
Herkunftsort: China
Markenname: TOPONE
Zertifizierung: ISO9001:2015
Modellnummer: 304/316/316L
Handelsimmobilien
Mindestbestellmenge: 1000kg
Preis: Verhandelbar
Zahlungsbedingungen: T/T, L/C, D/A, D/P,
Lieferfähigkeit: >10000KGS pro Woche
Schlagworte:

Kalt gezogenes Stahldraht

Kaltgewalzte Drähte

Kaltstauchdraht aus Edelstahl
Produktübersicht
302HQ Cold Heading Wire with Copper for Lower Work Hardening Product Introduction Every cold heading blow hardens the metal a little more. On a part formed in four or five stations, the accumulated work hardening at the head can be the difference between a clean form and a split. 302HQ carries a ...
Produktanpassungsattribute
Hervorheben

302HQ cold heading wire

,

copper-bearing stainless steel wire

,

low work hardening heading wire

Material:
304/316/316L
Oberfläche:
hell
Spulendurchmesser:
250-1000mm
Standard:
JIS G. EN. ASTM. LÄRM. GB usw.
Verpackung:
Spule oder spezielle Verpackung mit Platte
Status:
weich, halbweich
Produktbeschreibung
Detaillierte Spezifikationen & Funktionen
302HQ Cold Heading Wire with Copper for Lower Work Hardening Product Introduction Every cold heading blow hardens the metal a little more. On a part formed in four or five stations, the accumulated work hardening at the head can be the difference between a clean form and a split. 302HQ carries a deliberate copper addition that lowers the work hardening rate of the austenitic structure. The wire starts at a softness comparable to 304 but gains strength more slowly as it passes
Verwandte Produkte

Cold Heading Wire with In-Line Eddy Current Testing

Cold Heading Wire with In-Line Eddy Current Testing Product Introduction A cold header converts surface defects into broken tooling. A seam that runs along the wire opens into a crack at the first blow, and a sliver rolls into the head as a lap. Both cost more at your press than at our drawing line, ...

Edelstahldraht 0,15–12 mm, Oberflächenfehler und Grenzen

Surface Defects on Stainless Wire: Naming Them and Setting Limits Surface quality is one of the few wire properties still agreed in words rather than numbers. That is where most disputes come from: two parties say "good surface" and mean two different things, and the argument only starts after the ...

5mm Bright Annealed 430 Wire 0.15-12mm, Low Coil Set

5mm 430 Bright Annealed Wire: Straightness and Coil Set At 5 mm the problems change. A fine wire can be pulled straight by tension; a coarse wire carries the memory of the coil into the machine. Coil set, cast and straightness decide whether a 5 mm wire feeds cleanly into a bender or has to be ...

Stainless Scourer Wire 430/304 - Uniform Mesh, 0.15-12mm

430/304 Stainless Steel Scourer Wire for Uniform Mesh Structure Scourer wire is used for stainless steel scouring pads and cleaning mesh, where wire diameter consistency and surface condition determine how evenly the mesh forms and how the finished pad performs. This wire is supplied in 430 and 304 ...