304 Stainless Steel Spring Wire 0.15–12mm for Consistent Coiling
304 stainless steel spring wire
,0.15–12mm spring wire
,consistent coiling spring wire
304 Stainless Steel Spring Wire 0.15–12mm for Consistent Coiling
Product Introduction
TOPONE 304 stainless steel spring wire is a cold-drawn round wire designed for spring manufacturing, wire forming and industrial components.
Made from AISI 304 / SUS 304 stainless steel, the wire is available in a 0.15–12 mm diameter range. Bright and soap-coated surface options are available according to different forming and processing requirements.
For spring manufacturers, consistent coiling depends on more than the material grade. Wire diameter, dimensional tolerance, mechanical condition, surface condition, spring geometry and forming equipment should be considered together.
TOPONE can supply 304 stainless steel spring wire according to the required diameter, mechanical properties, surface condition, applicable standard and packaging specification.
Product Specifications
| Parameter | Specification |
|---|---|
| Product | 304 Stainless Steel Spring Wire |
| Material | AISI 304 / SUS 304 |
| Diameter Range | 0.15–12 mm |
| Wire Shape | Round Wire |
| Manufacturing Process | Cold Drawn |
| Surface | Bright / Soap Coated |
| Mechanical Condition | Spring Temper / Customized |
| Standards | ASTM / AISI / DIN / EN / GB / JIS or Customer Specification |
| Supply Form | Coil / Spool |
| Applications | Compression / Extension / Torsion Springs / Wire Forms |
| Customization | Diameter, Tolerance, Surface, Mechanical Properties, Packaging |
Technical note: Tensile strength, hardness, dimensional tolerance and other mechanical properties vary according to diameter, mechanical condition and applicable standard. Specific values should be confirmed for the required specification rather than applying one value across the complete 0.15–12 mm range.
Why Choose 304 Stainless Steel Spring Wire?
AISI 304 / SUS 304 Material
AISI 304 / SUS 304 is an austenitic stainless steel grade commonly used for industrial wire and spring applications.
For spring manufacturing, the material should be selected according to corrosion exposure, forming requirements, operating temperature and required mechanical properties.
0.15–12 mm Diameter Range
TOPONE supplies 304 stainless steel spring wire from 0.15 mm to 12 mm, covering fine spring wire as well as larger wire sizes for industrial spring and wire-forming applications.
The required diameter should be matched to the spring drawing, coil geometry, load requirements and forming equipment.
Cold-Drawn Manufacturing Process
The wire is manufactured through a cold-drawn process. For spring production, the final mechanical condition should be matched to the required forming process and finished spring specification.
Bright and Soap-Coated Surface Options
Different surface conditions are available for different processing requirements.
Bright Surface
Bright wire provides a clean metallic surface and can be selected when surface appearance and subsequent processing requirements are important.
Soap-Coated Surface
Soap-coated wire provides a lubricated surface condition that can be considered for certain spring coiling and cold-forming processes.
Surface selection should be based on the customer's tooling, forming process and lubrication requirements.
Applications
Compression Springs
304 stainless steel spring wire can be used for compression spring manufacturing in mechanical assemblies, industrial equipment and general hardware.
Important specification factors include wire diameter, spring diameter, free length, coil geometry and required spring force.
Extension Springs
For extension spring production, the wire specification should match the required tensile load, working extension and finished spring geometry.
Torsion Springs
304 spring wire can also be formed into torsion springs. Wire diameter, mechanical properties and spring geometry should be evaluated together according to the finished spring design.
Wire Forms
The wire can also be processed into:
Retaining springs
Clips
Hooks
Rings
Formed-wire components
Customized spring components
How to Select 304 Spring Wire for Consistent Coiling
1. Confirm the Material Grade
Specify AISI 304 / SUS 304 or the required equivalent designation according to the applicable standard.
2. Confirm Wire Diameter and Tolerance
Specify the required diameter within the 0.15–12 mm range.
For precision spring production, diameter tolerance and ovality should also be confirmed according to the spring drawing or applicable specification.
3. Define Mechanical Properties
Spring wire selection should include the required:
Tensile strength
Hardness
Spring temper
Mechanical condition
These values should be matched to the finished spring design and forming process.
4. Select the Surface Condition
Choose bright or soap-coated wire according to the forming equipment, tooling and lubrication requirements.
5. Confirm the Spring Type
Specify whether the wire will be used for:
Compression springs
Extension springs
Torsion springs
Retaining springs
Wire forms
Other customized spring components
Quality Control for Spring Wire
For spring manufacturing, product quality should be evaluated through measurable specifications rather than general claims.
Relevant inspection items can include:
Material grade
Chemical composition
Wire diameter
Diameter tolerance
Surface condition
Tensile strength
Hardness or mechanical condition
Coil dimensions
Packaging condition
Material traceability
For precision applications, the customer's drawing and applicable material standard should be used as the primary technical reference.
Custom 304 Stainless Steel Spring Wire
TOPONE can evaluate customized spring wire requirements based on:
Material grade
Wire diameter
Diameter tolerance
Surface condition
Mechanical properties
Spring temper
Coil weight
Packaging
Applicable standard
Spring application
For precision spring projects, customers can provide a spring drawing, technical specification or sample so the wire requirements can be evaluated more accurately.
Buyer Specification Checklist
For a technical inquiry, buyers can provide the following information:
| Requirement | Example |
|---|---|
| Material | AISI 304 / SUS 304 |
| Diameter | 0.15–12 mm |
| Tolerance | Customer Specification |
| Surface | Bright / Soap Coated |
| Spring Type | Compression / Extension / Torsion |
| Mechanical Requirement | Tensile Strength / Hardness / Spring Temper |
| Standard | ASTM / DIN / EN / GB / JIS |
| Quantity | Required Quantity |
| Packaging | Coil / Spool |
| Drawing | Recommended for Precision Applications |
Providing these details helps define the spring wire specification before production and reduces ambiguity during technical communication.
FAQ
What is 304 stainless steel spring wire?
304 stainless steel spring wire is a cold-drawn round wire made from AISI 304 / SUS 304 stainless steel and used for spring manufacturing and wire forming.
What is the diameter range?
TOPONE supplies 304 stainless steel spring wire from 0.15 mm to 12 mm. The exact diameter and tolerance should be confirmed according to the spring design and applicable specification.
What surface finishes are available?
The main options are bright and soap-coated surfaces. The suitable option depends on the forming process, tooling and lubrication requirements.
Can 304 spring wire be used for compression and torsion springs?
Yes. 304 stainless steel spring wire can be used for compression springs, extension springs, torsion springs and various formed-wire components when the material grade, diameter and mechanical condition meet the finished spring requirements.
What information is needed when ordering spring wire?
The recommended information includes material grade, wire diameter, tolerance, surface condition, mechanical requirements, spring type, applicable standard, quantity and packaging.
For precision applications, providing a spring drawing is recommended.
Technical Support for Spring Wire Selection
If you are sourcing 304 stainless steel spring wire, provide your diameter, tolerance, spring type, mechanical requirement, surface condition, quantity and applicable standard.
TOPONE can review the specification and recommend a suitable wire configuration for your spring manufacturing process.