Stainless Steel Annealed Wire 0.15–12mm for Building and Industrial Applications

Product Introduction

TOPONE stainless steel annealed wire is supplied in a soft annealed condition for applications requiring good wire workability, controlled mechanical properties and stainless steel material performance.

The available diameter range is 0.15–12mm. Different stainless steel grades, including 201, 302, 304, 316 and 316L, can be selected according to application requirements, working environment and mechanical specifications.

The annealing process adjusts the mechanical condition of the wire, providing a softer wire state suitable for selected bending, forming, tying and fabrication processes.

For building and industrial applications, wire selection should consider material grade, diameter, surface condition, mechanical requirements and final processing method.

Product Parameters

Soft Annealed Stainless Steel Wire

Stainless steel annealed wire is produced through a heat treatment process that changes the mechanical condition of the wire after drawing.

Compared with harder wire conditions, soft annealed wire is commonly selected for applications requiring easier bending, forming, tying or other secondary processing.

The suitable stainless steel grade and diameter should be selected according to the actual working environment, processing equipment and finished product requirements.

Key Product Advantages

Soft Condition for Better Wire Processing

The annealed condition provides a more workable wire state for selected manufacturing processes.

Typical applications include:

• Wire bending

• Wire forming

• Tying

• Fabrication

• Component manufacturing

The required mechanical properties should be confirmed according to the specific processing method and final application.

Wide Diameter Range 0.15–12mm

TOPONE supplies stainless steel annealed wire with diameters from 0.15mm to 12mm.

This range allows customers to select suitable wire sizes according to:

• Finished product dimensions

• Forming requirements

• Processing equipment

• Required wire structure

• Application conditions

Multiple Stainless Steel Grade Options

Different grades can be selected according to corrosion requirements, mechanical performance and processing needs.

Common options include:

• 201 Stainless Steel – suitable for selected general applications where material cost and basic stainless steel properties are considered.

• 302 Stainless Steel – commonly used for wire products requiring good forming characteristics.

• 304 Stainless Steel – widely used for general industrial applications.

• 316 / 316L Stainless Steel – selected for applications requiring higher resistance to certain corrosive environments.

The final grade selection should be based on the actual service conditions.

Bright and Soap-Coated Surface Options

The wire is available with different surface conditions according to application requirements.

Bright surface can be selected where a clean metallic appearance is required.

Soap-coated surface can be considered for selected forming and processing applications where surface lubrication is beneficial.

Surface selection should match the customer's production process and finished product requirements.

Applications

Building and Construction Applications

Stainless steel annealed wire can be used for selected building-related fabrication applications where stainless steel material and workable wire conditions are required.

Typical applications include:

• Formed wire components

• Fastening-related products

• Hardware fabrication

• Construction-related wire products

The appropriate grade and diameter should be selected according to the working environment.

Hardware Manufacturing

The soft annealed condition makes the wire suitable for selected hardware products requiring bending, shaping or forming processes.

Wire Forming

Annealed stainless steel wire can be processed into:

• Clips

• Hooks

• Brackets

• Loops

• Custom formed wire components

The forming suitability depends on wire diameter, geometry, tooling and required mechanical properties.

Industrial Fabrication

The 0.15–12mm diameter range provides options for different industrial fabrication requirements, from fine wire products to larger formed components.

How to Select Stainless Steel Annealed Wire

1. Select the Stainless Steel Grade

Choose the material grade according to:

• Corrosion exposure

• Working environment

• Processing requirements

• Final product requirements

2. Confirm the Wire Diameter

The available diameter range is:

0.15–12mm

Diameter selection should match the finished product size and forming process.

3. Confirm Mechanical Requirements

Different grades, diameters and annealing conditions may have different mechanical properties.

If the project requires specific tensile strength, elongation or hardness values, these requirements should be confirmed before production.

4. Select Surface Condition

Choose:

• Bright surface

• Soap-coated surface

according to the production process and final application.

5. Confirm Applicable Standard

Applicable standards may include:

• ASTM

• AISI

• JIS

• EN

• DIN

• GB

The required standard should be confirmed together with material grade and product specification.

Manufacturing Process

A typical production process includes:

Raw Material → Wire Drawing → Soft Annealing → Surface Treatment → Diameter Inspection → Final Inspection → Packing

The specific production process depends on the selected material grade, diameter, surface requirement and applicable standard.

Technical Information for Industrial Procurement

For B2B stainless steel wire purchasing, detailed technical specifications help confirm product suitability.

Recommended information includes:

• Stainless steel grade

• Wire diameter

• Diameter tolerance

• Annealed condition

• Surface finish

• Tensile strength

• Elongation

• Applicable standard

• Coil or spool weight

• Packaging requirements

• Inspection documents

Providing these details helps manufacturers and buyers evaluate whether the wire matches the intended processing requirements.

FAQ

What is stainless steel annealed wire?

Stainless steel annealed wire is stainless steel wire supplied in a softened condition after heat treatment. It is commonly selected for applications requiring bending, forming and fabrication.

What diameter range is available?

The available diameter range is 0.15–12mm.

Which stainless steel grades are available?

Common grades include 201, 302, 304, 316 and 316L.

What surface options are available?

The wire can be supplied with bright or soap-coated surface options.

Can the wire be customized?

Yes. Customers can specify material grade, diameter, surface condition, standard, packaging and application requirements.

What information is needed for quotation?

Please provide:

Grade + Diameter + Quantity + Surface + Standard + Application + Packaging

This information helps determine the suitable stainless steel annealed wire specification.