Stainless Steel Soft Annealed Wire 0.15–12mm for Easy Forming

Product Introduction

TOPONE stainless steel soft annealed wire is heat-treated to provide a softer and more workable condition for bending, weaving, tying and forming applications.

The wire is available in 0.15–12mm diameters and can be supplied in different stainless steel grades, surface conditions and packaging forms according to application requirements.

Soft annealing is used to adjust the mechanical condition of the wire, making it suitable for downstream processes where good workability is required. For wire netting and weaving, wire diameter, stainless steel grade, surface condition and mechanical properties should be selected according to the mesh design and production process.

Product Parameters

Stainless Steel Soft Annealed Wire for Netting

For stainless steel wire netting production, the wire needs to match the required mesh structure and forming process.

The 0.15–12mm diameter range provides options for different wire-forming requirements. Fine wire can be selected for smaller mesh structures, while larger diameters can be considered for heavier wire products.

Wire diameter should be evaluated together with the stainless steel grade, annealed condition, surface finish and mechanical requirements. The correct combination depends on the weaving equipment and final application.

Key Product Advantages

Soft Annealed Condition for Easier Forming

The annealing process changes the mechanical condition of the stainless steel wire and provides a softer condition for applications involving bending, weaving, tying and forming.

For applications with specific tensile strength or elongation requirements, the required mechanical properties should be confirmed according to the selected grade, diameter and applicable standard.

0.15–12mm Diameter Range

TOPONE supplies stainless steel soft annealed wire from 0.15mm to 12mm.

Diameter selection can be based on:

• Mesh opening

• Finished wire structure

• Bending requirements

• Forming equipment

• Required mechanical properties

Multiple Stainless Steel Grades

Different stainless steel grades can be selected according to the working environment and forming requirements.

Common options include 201, 302, 304, 316 and 316L. Other grades can be discussed according to the application and applicable standard.

For applications exposed to moisture, chemicals or other corrosive environments, the stainless steel grade should be evaluated according to the actual service conditions.

Bright or Matte Surface Options

Bright and matte surface conditions can be selected according to the production process and finished-product requirements.

For woven wire and visible wire products, surface condition can also be considered according to the required appearance and subsequent processing.

Coil or Spool Supply

The wire can be supplied in coil or spool form according to the customer's processing equipment.

Packaging requirements can be discussed based on wire diameter, coil weight, handling method and production requirements.

Applications

Wire Netting

Used for selected stainless steel wire mesh and netting production where a workable wire condition is required for weaving or forming.

Wire Weaving

The soft annealed condition can be suitable for wire interlacing and forming processes. Diameter and surface should be selected according to mesh design and weaving equipment.

Wire Forming

Suitable for selected applications involving bending, shaping, tying and other wire-forming operations.

Industrial Fabrication

Can be used for industrial wire products, formed wire components, hardware and other fabrication applications where the specified stainless steel grade and annealed condition are suitable.

How to Select Soft Annealed Stainless Steel Wire

1. Confirm the Stainless Steel Grade

Select the grade according to corrosion exposure, forming requirements and the final working environment.

2. Select the Wire Diameter

The available diameter range is 0.15–12mm.

For netting applications, diameter selection should consider mesh opening, wire spacing, finished structure and weaving equipment.

3. Confirm the Mechanical Condition

Soft annealed wire is intended for applications where wire workability is important.

If your project specifies tensile strength, elongation or hardness, these requirements should be confirmed before production.

4. Select the Surface

Choose bright, matte or other applicable surface conditions according to the processing method and final product requirements.

5. Confirm the Applicable Standard

Specify the required ASTM, AISI, JIS, EN, DIN or GB standard together with the grade and mechanical requirements.

Quality & Technical Information

For B2B stainless steel wire procurement, product selection should be based on measurable technical information rather than general descriptions.

Depending on the project, the purchasing specification can include:

• Stainless steel grade

• Wire diameter

• Diameter tolerance

• Tensile strength

• Elongation

• Surface condition

• Annealed condition

• Applicable standard

• Coil or spool weight

• Packaging requirements

• Inspection or material documentation

This information helps buyers and engineers evaluate whether the wire is suitable for their netting, weaving or forming process.

Manufacturing Process

A typical production flow can include:

Raw Material → Wire Drawing → Soft Annealing → Surface Treatment → Diameter Inspection → Final Inspection → Packing

The specific process and inspection requirements should be confirmed according to the selected material grade, diameter, surface and applicable standard.

FAQ

What is soft annealed stainless steel wire?

Soft annealed stainless steel wire is stainless steel wire that has undergone heat treatment to obtain a softer mechanical condition suitable for selected bending, weaving, tying and forming processes.

What diameter range is available?

TOPONE supplies this product in diameters from 0.15–12mm.

Can the wire be used for stainless steel netting?

Yes. Soft annealed stainless steel wire can be considered for selected netting and weaving applications. The appropriate diameter, grade, surface and mechanical condition should be selected according to the mesh design and production process.

What stainless steel grades are available?

Common grades include 201, 302, 304, 316 and 316L, with additional grades available according to specific requirements.

Can I specify tensile strength?

Yes. If a specific tensile strength, elongation or other mechanical requirement is needed, it should be stated together with the grade, diameter and applicable standard.

What information should I provide when requesting a quotation?

For technical confirmation, provide:

Grade + Diameter + Quantity + Surface + Standard + Application + Packaging

This information helps determine the appropriate stainless steel wire specification.