304 EPQ Wire 0.15–12mm for Precise Wire Forming

Product Introduction

TOPONE 304 EPQ wire is a stainless steel forming wire designed for manufacturers that require controlled diameter, surface condition and mechanical properties for subsequent wire forming and component production.

The wire is available in 0.15–12mm diameters and can be supplied with a bright or electroplated surface, depending on the intended processing and appearance requirements.

AISI 304 stainless steel is widely used for general industrial and fabricated wire products. For applications involving bending, forming, or repeated processing, the selected wire condition should be matched with the forming method, component geometry and required mechanical properties.

This product can be specified according to material grade, diameter, surface condition, mechanical condition, applicable standard and packaging requirements.

Product Specifications

The original product page lists 300-series / 200-series grades as possible options. For this product page, however, 304 should remain the primary material keyword and specification. Other grades should be moved to related-product links rather than mixed into the main product description.

What Is 304 EPQ Wire?

EPQ wire is commonly used as a stainless steel forming wire for components that require controlled wire dimensions and suitable mechanical condition for bending or forming operations.

For manufacturers, the key selection parameters are not limited to the stainless steel grade. Diameter, tolerance, surface condition and mechanical condition can all influence how the wire behaves during processing.

For this reason, the specification should be confirmed according to the customer's forming equipment and final component design.

Key Product Features

0.15–12mm Diameter Range

TOPONE supplies 304 stainless steel EPQ wire from 0.15mm to 12mm.

The broad diameter range covers fine wire and larger forming wire requirements, allowing manufacturers to select a diameter according to component dimensions, forming equipment and design requirements.

Bright Surface for Wire Forming

Bright surface wire is available for applications where a clean metallic appearance and controlled surface condition are required.

For forming processes that require additional lubrication, a suitable coated or lubricated surface can be specified according to the processing requirements.

Multiple Mechanical Conditions

The product page lists hard, 3/4 hard and 1/2 hard conditions.

The appropriate condition should be selected according to the required bending, forming and final component characteristics rather than treating one condition as suitable for every application.

Specification-Based Customization

For customized orders, the following information can be confirmed before production:

• Stainless steel grade

• Wire diameter

• Diameter tolerance

• Surface condition

• Mechanical condition

• Applicable material standard

• Coil or spool weight

• Packaging requirements

• Intended application

This specification-based approach is particularly useful for manufacturers who use stainless steel wire as a raw material for further processing.

Applications

Kitchen Baskets and Racks

304 EPQ wire can be used for forming kitchen baskets, racks, holders and other wire products where stainless steel material and a controlled wire surface are required.

Kitchen and Bath Hardware

The wire can be processed into hooks, holders, brackets and other formed hardware components.

Wire Forming

Typical wire-forming applications include:

• Wire baskets

• Racks

• Hooks

• Clips

• Brackets

• Handles

• Formed stainless steel components

Industrial Components

304 EPQ wire can also be considered for industrial wire components where the material grade, diameter and mechanical condition meet the application's requirements.

How to Select 304 EPQ Wire

1. Confirm the Material Grade

AISI 304 is commonly selected for general stainless steel wire applications. The grade should be evaluated according to the actual service environment and required material properties.

2. Select the Wire Diameter

Choose the diameter based on the component design, bending radius, forming equipment and dimensional requirements.

The available range is 0.15–12mm.

3. Confirm the Mechanical Condition

Hard, 3/4 hard and 1/2 hard conditions provide different processing characteristics.

The required condition should be confirmed according to the forming process rather than selected only by diameter.

4. Confirm the Surface

Bright surface is suitable when surface appearance and a clean wire surface are important.

For forming processes requiring lubrication, the surface condition should be selected together with the forming method.

5. Specify the Applicable Standard

The product can be specified according to relevant ASTM, AISI, JIS, EN, DIN or GB requirements. The exact standard should be confirmed before production.

Quality and Technical Information

TOPONE supplies stainless steel wire according to specified material grades, diameters, surface conditions and mechanical requirements.

The available reference standards listed for this product include ASTM A580, JIS G4309, EN 10088-3 and GB/T 4240 or equivalent requirements.

For technical purchasing, customers can provide an existing material specification, drawing, sample requirement or production application. The wire specification can then be reviewed according to the required diameter, surface, mechanical condition and applicable standard.

Packaging Options

304 EPQ wire can be supplied in:

• Coil

• Spool

• Pallet

• Customized packaging

Packaging can be selected according to the customer's processing equipment, transportation requirements and subsequent wire handling process.

FAQ

What is 304 EPQ wire used for?

304 EPQ wire is mainly used for stainless steel wire forming applications, including baskets, racks, kitchen hardware, hooks, clips and other formed components.

What diameter range is available?

The available diameter range is 0.15–12mm.

What surface options are available?

Bright and electroplated surface options are listed for this product. The appropriate surface should be confirmed according to the customer's forming and finishing requirements.

Can the mechanical condition be customized?

Yes. The current product specification lists hard, 3/4 hard and 1/2 hard conditions. The required condition should be confirmed according to the forming process and component requirements.

What standards can be used?

The product can be specified according to applicable ASTM, AISI, JIS, EN, DIN or GB standards. Specific requirements should be confirmed before production.

Is 304 EPQ wire suitable for spring manufacturing?

304 stainless steel wire can be used in selected spring and formed-wire applications, but spring manufacturing requires the correct mechanical condition, diameter, tensile properties and forming process. For dedicated spring applications, a specific stainless steel spring wire specification should be selected.