OEM 304 316 316L Stainless Steel Wire 0.15–12mm

Product Introduction

OEM stainless steel wire is supplied for manufacturers that require specified material grades, wire diameters, surface conditions, and mechanical properties for further processing.

TOPONE supplies stainless steel wire in 0.15–12 mm diameters, with common austenitic grades including 304, 304L, 316 and 316L. Depending on the application and processing requirements, the wire can be supplied with a bright or soap-coated surface.

For OEM purchasing, material grade and diameter are only part of the specification. Surface condition, mechanical properties, dimensional tolerance, applicable standard, packaging, and intended processing should also be confirmed before production.

Product Specifications

Specific mechanical properties, dimensional tolerances and surface requirements should be confirmed according to the selected grade, diameter and applicable standard.

304 Stainless Steel Wire

304 stainless steel wire is a widely used option for general industrial wire applications.

It can be considered for wire forming, racks, hangers, mesh, spring-related components and other applications where the required corrosion resistance and mechanical condition are compatible with the service environment.

For OEM applications, the required wire condition should be specified together with diameter, surface finish and mechanical requirements.

316 Stainless Steel Wire

316 stainless steel wire is commonly selected when the working environment requires greater corrosion resistance than typical general-purpose stainless steel applications.

It can be considered for industrial components exposed to moisture, marine environments, or other conditions where material selection requires additional corrosion-resistance considerations.

The actual suitability should be evaluated according to the specific working environment and applicable material requirements.

304L and 316L Stainless Steel Wire

304L and 316L are low-carbon versions of 304 and 316 stainless steel respectively.

These grades may be selected when the application or subsequent manufacturing process requires a low-carbon stainless steel specification.

The appropriate grade should be determined from the customer's material standard, fabrication process, and service conditions.

Bright and Soap-Coated Surface Options

Bright Surface

Bright stainless steel wire provides a clean and reflective surface condition and can be considered for applications where wire appearance is important.

It is also suitable for manufacturers that require a bright wire surface for subsequent processing or finished components.

Soap-Coated Surface

Soap-coated stainless steel wire provides a lubricated surface condition that can be considered for certain forming and drawing processes.

The appropriate surface should be selected according to the customer's equipment, forming process, surface requirements, and subsequent processing.

Diameter Range: 0.15–12 mm

The available stainless steel wire diameter range is 0.15–12 mm.

The appropriate diameter depends on the intended application and manufacturing process.

For OEM requirements, buyers should confirm:

• Nominal wire diameter

• Dimensional tolerance

• Material grade

• Mechanical condition

• Surface finish

• Forming or processing method

• Applicable standard

• Final component requirements

For precision applications, the required tolerance should be specified separately rather than relying only on the nominal diameter.

Applications

OEM stainless steel wire can be used in various manufacturing and industrial applications, including:

• Wire forming

• Stainless steel springs

• Wire clips

• Clothes hangers

• Dish racks

• BBQ mesh and grill components

• Industrial wire forms

• Cable components

• Retaining components

• Custom wire products

• General stainless steel wire components

The actual material grade and wire condition should be selected according to the final component and working environment.

OEM Stainless Steel Wire Customization

OEM wire requirements can be specified according to the customer's technical requirements.

Typical customization information includes:

1. Stainless steel grade

2. Wire diameter

3. Dimensional tolerance

4. Tensile strength or mechanical condition

5. Surface finish

6. Material standard

7. Coil or spool weight

8. Packaging requirements

9. Application

10. Required quantity

For repeat OEM production, maintaining the same material grade, dimensional specification, surface condition, and agreed production standard helps establish a consistent purchasing specification.

How to Choose 304 or 316 Stainless Steel Wire

Material grade should be selected according to the working environment and final application.

Choose 304 when:

• General corrosion resistance is required

• The application is not subject to particularly aggressive conditions

• The wire is used for general industrial or formed-wire components

• The required material specification corresponds to 304 stainless steel

Consider 316 when:

• The working environment requires additional corrosion-resistance considerations

• The component may be exposed to marine or chloride-containing environments

• The customer's technical specification requires 316 stainless steel

The choice between 304 and 316 should be based on actual service conditions rather than simply selecting the higher grade.

Quality and Manufacturing Information

TOPONE supplies stainless steel wire for OEM manufacturing, spring production, wire forming, and other industrial applications.

The product can be specified according to material grade, diameter, surface condition, mechanical requirements, and applicable international standards.

For customized OEM requirements, customers can provide drawings, technical specifications, material standards, or existing wire specifications for evaluation.

FAQ

What stainless steel grades are available?

Common OEM grades include 304, 304L, 316 and 316L. Other grades can be evaluated according to the application and material specification.

What is the available diameter range?

The current stainless steel wire specification is 0.15–12 mm.

Can the wire be supplied with a bright surface?

Yes. Bright surface is available. Soap-coated surface can also be considered when the application requires a lubricated wire condition.

What standards are available?

The wire can be specified according to AISI, ASTM, DIN, EN, GB, JIS and equivalent material standards.

Can you provide OEM specifications?

Yes. OEM requirements can be evaluated according to material grade, diameter, tolerance, surface condition, mechanical properties, standard, packaging and application.

What is the difference between 304 and 316 stainless steel wire?

304 is widely used for general stainless steel applications, while 316 is commonly considered when the service environment requires additional corrosion-resistance considerations. The final selection should be based on actual working conditions.

Can this wire be used for springs?

Selected stainless steel grades and mechanical conditions can be used for spring manufacturing. However, spring applications require specific consideration of wire diameter, tensile condition, spring geometry and forming process.