logo
86-574-88328001
PO

302 Stainless Spring Wire - Cold Worked Magnetism Control

302 Stainless Spring Wire - Cold Worked Magnetism Control
Podstawowe właściwości
Miejsce pochodzenia: Chiny
Nazwa marki: TOPONE
Orzecznictwo: ISO/SGS/RosH
Numer modelu: 302
Nieruchomości handlowe
Minimalna ilość zamówienia: 1000 kg
Cena: Zbywalny
Warunki płatności: T/T, akredytywa
Możliwość zaopatrzenia: > 1000 ton miesięcznie
Tagi:

Drut ze stali nierdzewnej

ss sprężynowy drut

ss Węzeł drutu
Podsumowanie produktu
302 Stainless Spring Wire - Cold Worked Magnetism Control A 302 stainless spring wire is austenitic and should not be magnetic, yet a finished spring made from it often is. Cold drawing and cold coiling transform part of the austenite into deformation martensite, and that phase is ferromagnetic. The ...
Atrybuty niestandardowe produktu
Podkreślić

302 stainless spring wire

,

cold worked spring wire

,

magnetism control spring wire

Orzecznictwo:
ISO,SGS,Rosh
Aplikacja:
Sprężyny/śruby/drutu/łowiska
Średnica:
0,15-12 mm
Tworzywo:
302
Powierzchnia:
Jasne/powlekane mydłem
Nazwa produktu:
0.32mm 302 Nierdzewna wiązka sprężynowa
Typ:
Twarde/miękkie
Uszczelka:
szpula, cewka
Opis produktu
Szczegółowe specyfikacje i cechy
302 Stainless Spring Wire - Cold Worked Magnetism Control A 302 stainless spring wire is austenitic and should not be magnetic, yet a finished spring made from it often is. Cold drawing and cold coiling transform part of the austenite into deformation martensite, and that phase is ferromagnetic. The effect is negligible in a lightly coiled spring and clearly measurable in a tightly coiled one made from heavily drawn wire. For most applications it can be ignored. For springs
Powiązane produkty

Drut nierdzewny 0,15-12 mm, spawanie i wykończenie po spawaniu

Welding Stainless Steel Wire: Grade, Heat Input and What Comes After Welding wire is usually discussed as a filler question. On stainless wire it is three decisions instead: the carbon level of the wire, the heat input at the joint, and what happens to the surface after the arc stops. Get the grade ...

Drut nierdzewny 0,15–12 mm, objaśniono test w mgle solnej

Salt Spray Hours on Stainless Wire: What the Number Really Means A salt spray figure is usually read as a service-life promise. It is not. It is a ranking of two materials under one fixed, continuous set of conditions, and the number is only meaningful when the grade, the surface finish and the test ...

Drut nierdzewny wyżarzany miękki 0,15-12 mm, kontrola wyżarzania

Annealing Control: Why Two Soft Coils Can Feel Different Two coils can both be labelled annealed, both sit inside 550-750 N/mm2, and still behave differently at the press. The reason is that "soft" is a range, and where a coil sits inside that range is decided by the annealing practice rather than ...

1.2mm 669 Bright Annealed Wire 0.15-12mm for Forming

Bright Annealed 1.2mm 669 Stainless Wire for Visible Parts Bright annealing is the step that decides whether a stainless wire part can be sold without polishing. The wire is annealed in a controlled reducing atmosphere straight after drawing, so no oxide scale forms and the surface stays metallic ...