logo
86-574-88328001
PO

430 Stainless Wire 0.15-12mm, Dry Food Zones

430 Stainless Wire 0.15-12mm, Dry Food Zones
Podstawowe właściwości
Miejsce pochodzenia: Chiny
Nazwa marki: TOPONE
Orzecznictwo: ISO9001:2015
Numer modelu: 201/302/304/316/316L
Nieruchomości handlowe
Minimalna ilość zamówienia: 1000 kg
Cena: Zbywalny
Warunki płatności: D/P, L/C, T/T, D/A
Możliwość zaopatrzenia: > 10000KGS tygodniowo
Tagi:

Cewka z drutu ze stali nierdzewnej

drut jasny

wyżarzany
Podsumowanie produktu
430 Stainless Steel Wire in Food Equipment: Where It Belongs 430 appears in food plants far more often than its reputation suggests, but it appears in specific places: dry contact zones, non-acidic products, and areas cleaned with water rather than chlorinated or acidic agents. The reason is the ...
Atrybuty niestandardowe produktu
Podkreślić

430 stainless wire dry food zones

,

0.15-12mm stainless steel wire

,

annealed stainless steel wire

Tworzywo:
430/410
Uszczelka:
na życzenie klienta
Standard:
JIS G. EN. JIS G. EN. ASTM. ASTM. DIN. HAŁAS. GB etc
Powierzchnia:
matowy lub jasny
Możliwość Supply:
> 500 ton miesięcznie
Powierzchnia:
Jasny, matowy
Długość:
Żądanie klienta
Średnica:
0,15-12 mm
Opis produktu
Szczegółowe specyfikacje i cechy
430 Stainless Steel Wire in Food Equipment: Where It Belongs 430 appears in food plants far more often than its reputation suggests, but it appears in specific places: dry contact zones, non-acidic products, and areas cleaned with water rather than chlorinated or acidic agents. The reason is the grade itself. Ferritic 430 carries 16-18% chromium and no molybdenum, so its resistance to chloride pitting sits below 304 and well below 316L. Clean-in-place cycles built around
Powiązane produkty

304 Spring Wire 0.15-12mm, Consistent Coiling

304 Stainless Spring Wire: Tensile, Cast and Coil Consistency Spring wire is not judged on tensile strength alone. Two numbers decide whether a coiling line runs: the tensile band and the elastic limit, which is the stress the wire carries without taking a permanent set. A coil that meets the ...

5mm Bright Annealed 430 Wire 0.15-12mm, Low Coil Set

5mm 430 Bright Annealed Wire: Straightness and Coil Set At 5 mm the problems change. A fine wire can be pulled straight by tension; a coarse wire carries the memory of the coil into the machine. Coil set, cast and straightness decide whether a 5 mm wire feeds cleanly into a bender or has to be ...

1.8mm SUS304 Annealed Wire 0.15-12mm for Braiding

1.8mm SUS304 Annealed Stainless Steel Wire for Braiding and Weaving On a braiding machine every carrier feeds at the same speed. If one spool runs a slightly heavier gauge, the braid angle changes and the hose cover shows a bulge. Diameter consistency, not tensile alone, decides whether a 1.8mm ...

Miękki drut ze stali nierdzewnej 18 Gauge 304 do plecionych pasków do zegarków

18 Gauge 304 Soft Stainless Steel Wire for Braided Watchbands Product Introduction TOPONE 18 gauge 304 stainless steel soft wire is designed for fine wire forming, braiding and small wire components where a soft material condition and controlled diameter are required. The featured specification is ...