Corrosion Resistant Stainless Wire 0.15-12mm, Annealed
Corrosion Resistant Stainless Wire 0.15-12mm, Annealed
ویژگی های اساسی
محل مبدا:
چین
نام تجاری:
TOPONE
گواهینامه:
ISO9001:2015
شماره مدل:
201/302/304/316/316L
خواص معاملاتی
حداقل مقدار سفارش:
1000 کیلوگرم
قیمت:
قابل مذاکره
شرایط پرداخت:
D/P ، L/C ، T/T
توانایی تامین:
> 10000KGS در هفته
خلاصه محصول
Corrosion Resistant Stainless Steel Wire, Annealed 0.15-12 mm Corrosion resistance is usually discussed as a grade property, but on a finished part it is often a processing property. Cold drawing leaves residual tensile stress in the wire, and that stress is where chloride pitting and stress ...
ویژگی های سفارشی محصول
برجسته کردن
Annealed Stainless Wire 0.15-12mm
,Corrosion Resistant Stainless Wire
,Annealed Stainless Steel Wire
مواد:
1.4567
بسته بندی:
با درخواست مشتری
استاندارد:
JIS G. EN. JIS G. EN. ASTM. ASTM. DIN. DIN. GB etc
سطح:
مات یا روشن
قابلیت ارائه:
بیش از 500 تن در ماه
قطر:
0.15-12 میلی متر
توضیحات محصول
مشخصات و ویژگی‌های دقیق
Corrosion Resistant Stainless Steel Wire, Annealed 0.15-12 mm Corrosion resistance is usually discussed as a grade property, but on a finished part it is often a processing property. Cold drawing leaves residual tensile stress in the wire, and that stress is where chloride pitting and stress corrosion cracking start. Annealing after drawing is the step that removes it. This wire is annealed and supplied bright or acid-pickled, from 0.15 mm to 12 mm, in 304, 304L and 316L. The
محصولات مرتبط
