logo
86-574-88328001
GE

201 Stainless Screw Wire - Nitrogen Strengthened Grade

201 Stainless Screw Wire - Nitrogen Strengthened Grade
Grundlegende Eigenschaften
Herkunftsort: China
Markenname: TOPONE
Zertifizierung: ISO/SGS/RosH
Modellnummer: 201
Handelsimmobilien
Mindestbestellmenge: 1000kg
Preis: Verhandelbar
Zahlungsbedingungen: T/T, L/C
Lieferfähigkeit: > 1000 Tonnen pro Monat
Schlagworte:

Edelstahldraht

ss Federdraht

Edelstahl-Drahtspule
Produktübersicht
201 Stainless Screw Wire with Nitrogen Strengthening Product Introduction 201 is the grade a screw maker looks at when 304 prices stop fitting the part. It keeps the austenitic structure and the forming behaviour, but it holds less nickel and relies on manganese and nitrogen to do that job instead. ...
Produktanpassungsattribute
Hervorheben

201 stainless screw wire

,

nitrogen strengthened stainless wire

,

stainless steel spring wire

Grad:
201
Anwendung:
Feder, Schraube, Drahtform
Zertifizierung:
ISO,SGS,RosH
Durchmesser:
0,6 mm
Standard:
AISI, ASTM, DIN, JIS, GB
Oberfläche:
Bright, Seifenkoaguliert
Typ:
Hart
Zugfestigkeit:
1750N/mm2
Verpackung:
Spirale, Spulen
Produktbeschreibung
Detaillierte Spezifikationen & Funktionen
201 Stainless Screw Wire with Nitrogen Strengthening Product Introduction 201 is the grade a screw maker looks at when 304 prices stop fitting the part. It keeps the austenitic structure and the forming behaviour, but it holds less nickel and relies on manganese and nitrogen to do that job instead. The nitrogen is what makes the substitution work. It stabilises the austenite and raises yield strength at the same time, so a 201 screw wire can be drawn to a higher strength than
Verwandte Produkte

Kaltgezogener Edelstahldraht – stabile Festigkeitskontrolle

Cold Drawn Stainless Steel Wire - Stable Strength Control Cold drawn stainless steel wire acquires its dimensional accuracy and mechanical strength from a sequence of drawing passes, not from a single operation. Each pass reduces the cross-sectional area by a defined amount, and the accumulated ...

Edelstahldraht 0,15–12 mm für Wandanker und Fassaden

Stainless Steel Wire for Wall Ties and Facade Support Wire that goes into a wall cannot be replaced afterwards. That is the whole argument for stainless in masonry ties, and it is a corrosion argument rather than a strength one. A galvanised tie that starts to rust expands several times its own ...

5mm Bright Annealed 430 Wire 0.15-12mm, Low Coil Set

5mm 430 Bright Annealed Wire: Straightness and Coil Set At 5 mm the problems change. A fine wire can be pulled straight by tension; a coarse wire carries the memory of the coil into the machine. Coil set, cast and straightness decide whether a 5 mm wire feeds cleanly into a bender or has to be ...

1.8mm SUS304 Annealed Wire 0.15-12mm for Braiding

1.8mm SUS304 Annealed Stainless Steel Wire for Braiding and Weaving On a braiding machine every carrier feeds at the same speed. If one spool runs a slightly heavier gauge, the braid angle changes and the hose cover shows a bulge. Diameter consistency, not tensile alone, decides whether a 1.8mm ...