logo
86-574-88328001
DU

Custom Spiral Springs - Acceptance by Sampling Plan

Custom Spiral Springs - Acceptance by Sampling Plan
Basiseigenschappen
Plaats van herkomst: China
Merknaam: Topone
Certificering: ASTM
Modelnummer: 304, 304L, 316, 316L, 430
Handelseigendommen
Minimale bestelhoeveelheid: 1000 stuks
Betalingsvoorwaarden: L/c, t/t, d/a
Labels:

Torsie Springs

DRAADvorm

draadvormverlenging
Productoverzicht
Op maat gemaakte spiraalveren op tekening met schriftelijk bemonsteringsplan (ISO 2859-1, AQL 2,5/1,5), belastingtesten per batch, 0,15-12 mm draad en volledige traceerbaarheid.
Product aangepaste attributen
Markeren

Custom Spiral Springs sampling plan

,

Wire Forming spiral springs

,

Custom spiral springs acceptance

Sollicitatie:
platte draad van roestvrij staal
Temperatuurbestendigheid:
Hoog
Gebruik:
verschillende toepassingen
Materiaal:
Roestvrij staal
Diameter:
0,15 mm - 12 mm
Item:
met een breedte van niet meer dan 50 mm
Lengte:
Aangepast
Productbeschrijving
Gedetailleerde specificaties en kenmerken
Custom Spiral Springs - Acceptance by Sampling Plan Product Introduction TOPONE produces custom stainless steel spiral springs made to customer drawings, wound from certified spring wire in 0.15-12 mm diameters. For made-to-drawing parts the decisive question is not the datasheet but the acceptance plan: what is checked, on how many pieces, and what happens when a batch fails. This page sets out the sampling and inspection practice we apply, so it can be written directly into
Gerelateerde producten

Custom Spiral Springs - Acceptance by Sampling Plan

Op maat gemaakte spiraalveren op tekening met schriftelijk bemonsteringsplan (ISO 2859-1, AQL 2,5/1,5), belastingtesten per batch, 0,15-12 mm draad en volledige traceerbaarheid.

Roestvrij draad 0,15-12 mm, cyclische buigvermoeidheidslevensduur

Cyclic Bending Fatigue in Stainless Steel Wire: Where Failures Start A wire that survives one bend and a wire that survives a million cycles are two different specifications, even when both are the same grade and the same diameter. Fatigue is a surface and stress-amplitude problem, and the grade ...

Roestvrij staaldraad 0,15-12 mm, op maat gesneden en ontbraamd

Cut-to-Length Stainless Wire: Tolerance, Ends and Straightness Buying wire by length instead of by coil moves three problems from the customer's shop to the supplier's: the cut tolerance, the condition of the two ends, and whether the piece is still straight when it arrives. All three have to be ...

Corrosiebestendig roestvrij draad 0,15-12 mm, gegloeid

Corrosion Resistant Stainless Steel Wire, Annealed 0.15-12 mm Corrosion resistance is usually discussed as a grade property, but on a finished part it is often a processing property. Cold drawing leaves residual tensile stress in the wire, and that stress is where chloride pitting and stress ...