logo
86-574-88328001
PO

302 Stainless Wire - Batch Consistency and Cpk Control

302 Stainless Wire - Batch Consistency and Cpk Control
Propriedades Básicas
Local de Origem: China
Marca: TOPONEwire
Certificação: ISO9001
Número do modelo: 201/302/304/316/316L
Propriedades comerciais
Quantidade mínima de pedido: 500KG
Condições de pagamento: L/C, T/T,
Capacidade de fornecimento: >500 toneladas pelo mês
Etiquetas:

fio macio de aço inoxidável

Arame fino de aço inoxidável

Fio de aço dos SS
Resumo do Produto
302 Stainless Wire - Batch Consistency and Cpk Control Two deliveries of the same grade at the same diameter can both be inside specification and still cause different problems, because a specification sets limits and does not describe the distribution inside them. One lot may run tightly around the ...
Atributos personalizados do produto
Destacar

302 stainless steel wire

,

fine stainless steel wire

,

batch consistency Cpk control

Material:
Aço inoxidável
Diâmetro:
0.15-12mm
Embalagem:
Bobina ou carretel com pálete
Superfície:
Brilhante ou sabão cotaed
Padrão:
JIS G. EN10270-3. ASTM.DIN.GB etc.
Descrição do produto
Especificações e características pormenorizadas
302 Stainless Wire - Batch Consistency and Cpk Control Two deliveries of the same grade at the same diameter can both be inside specification and still cause different problems, because a specification sets limits and does not describe the distribution inside them. One lot may run tightly around the nominal value while another scatters across the whole tolerance band. The second lot is fully compliant and will produce scrap on a machine set up for the first. This page
Produtos Relacionados

Fio de Perfil de Aço Inoxidável Recozido - Controle de Tamanho de Grão

Annealed Stainless Profile Wire - Grain Size Control Two coils of annealed stainless wire can share the same grade, the same diameter and the same tensile strength, and still behave differently on the same press. The difference is usually grain size. Grain size controls how the metal distributes ...

Fio inoxidável 0,15-12mm, vida útil de fadiga por flexão cíclica

Cyclic Bending Fatigue in Stainless Steel Wire: Where Failures Start A wire that survives one bend and a wire that survives a million cycles are two different specifications, even when both are the same grade and the same diameter. Fatigue is a surface and stress-amplitude problem, and the grade ...

Stainless Wire for Scrubber Making 0.15-12mm, Crimp Ready

Stainless Steel Wire for Cleaning Scrubber Manufacturing, 0.15-12 mm A scrubber line runs the wire through a crimping head, then winds the crimped ribbon into a pad. Two things stop that line: diameter drift that jams the crimp rolls, and a temper that varies coil to coil so the crimp depth changes. ...

Fio inoxidável SUS304 recozido 0,15-12mm para fácil conformação

Annealed SUS304 Stainless Steel Wire for Forming, 0.15-12 mm SUS304 (EN 1.4301) wire supplied in the annealed condition is chosen when a part has to be bent, coiled or woven after the wire arrives. Annealing removes the work-hardening left by drawing, so the wire deforms with a predictable force ...