logo
86-574-88328001
PO

SUS304 Wire 0.15-12mm, Coil Build and Packing

SUS304 Wire 0.15-12mm, Coil Build and Packing
Propriedades Básicas
Local de Origem: China
Marca: TOPONE
Certificação: ISO/SGS/RosH
Número do modelo: 304
Propriedades comerciais
Quantidade mínima de pedido: 1000kg
Preço: Negociável
Condições de pagamento: L/C,T/T
Capacidade de fornecimento: > 1000 toneladas por mês
Etiquetas:

Bobina de aço inoxidável do fio

fio recozido brilhante

ss bobina de arame
Resumo do Produto
Coil Build, Spool and Packing: What Wire Buyers Should Specify A specification sheet usually says coil weight 5-250 kg and stops there. On the shop floor the number that matters is not the weight but whether the coil pays off without stopping the line. Three details decide that: coil weight against ...
Atributos personalizados do produto
Destacar

SUS304 stainless steel wire

,

annealed wire coil packing

,

0.15-12mm stainless steel wire

Padrão:
JIS,EN,ASTM,AISI,DIN,GB
Tratamento de superfície:
Brilhante/ revestido de sabão
Nota:
304
Aplicativo:
Parafuso
Embalagem:
Carreteira/paleta
Diâmetro:
2,8 mm
Tipo:
Macio
Resistência à tracção:
550-750N/mm2
Certificação:
ISO,SGS,RosH
Descrição do produto
Especificações e características pormenorizadas
Coil Build, Spool and Packing: What Wire Buyers Should Specify A specification sheet usually says coil weight 5-250 kg and stops there. On the shop floor the number that matters is not the weight but whether the coil pays off without stopping the line. Three details decide that: coil weight against the pay-off equipment, coil build, and how the coil is packed for the voyage. This wire is supplied annealed at 550-750 N/mm2, from 0.15 mm to 12 mm, in coils of 5-250 kg or spools
Produtos Relacionados

Corrosion Resistant Stainless Wire 0.15-12mm, Annealed

Corrosion Resistant Stainless Steel Wire, Annealed 0.15-12 mm Corrosion resistance is usually discussed as a grade property, but on a finished part it is often a processing property. Cold drawing leaves residual tensile stress in the wire, and that stress is where chloride pitting and stress ...

3mm 430 Magnetic Stainless Wire 0.15-12mm for Forming

3mm 430 Annealed Stainless Steel Wire for Formed Frames 430 is a ferritic stainless grade: 16-18% chromium, no nickel, magnetic, and cheaper than 304 at the same diameter. For formed frames on dry-service products it does the job. What it will not do is hold up in chloride or marine exposure, or ...

Brush Steel Wire Spool 0.15-12mm - Consistent Tufting

Brush Steel Wire Spool for Consistent Brush Tufting Brush steel wire is used for industrial brush manufacturing, where tufting quality depends on stable wire diameter, controlled straightness and consistent surface condition. This wire is cold drawn and supplied on BS60, BP60 or DIN wooden spools, ...

Fio de aço inoxidável 304/316/201 0,15–12 mm com superfície brilhante

304/316/201 Stainless Steel Wire 0.15–12mm with Bright Surface Product Introduction TOPONE stainless steel wire is available in 304, 316 and 201 grades for industrial manufacturing, wire forming and general stainless steel applications. The available diameter range is 0.15–12mm , with a bright ...