logo
86-574-88328001
PO

302 Spring Wire - Drawing Die Material and Surface

302 Spring Wire - Drawing Die Material and Surface
Podstawowe właściwości
Miejsce pochodzenia: Chiny
Nazwa marki: TOPONE
Orzecznictwo: ISO/SGS/RosH
Numer modelu: 302
Nieruchomości handlowe
Minimalna ilość zamówienia: 1000 kg
Cena: Zbywalny
Warunki płatności: T/T, akredytywa
Możliwość zaopatrzenia: > 1000 ton miesięcznie
Tagi:

Drut ze stali nierdzewnej

ss sprężynowy drut

ss Węzeł drutu
Podsumowanie produktu
302 Spring Wire - Drawing Die Material and Surface Two suppliers can draw the same rod down to 1.4 mm in 302 and deliver wire that looks the same on a certificate but differs on the surface. The difference is usually the die: which material it was made from, how long it has run, and whether the ...
Atrybuty niestandardowe produktu
Podkreślić

302 spring wire drawing die material

,

stainless steel spring wire surface finish

,

302 spring wire corrosion resistance

Orzecznictwo:
ISO,SGS,Rosh
Aplikacja:
Sprężyny/śruby/drutu/łowiska
Średnica:
0,15-12 mm
Tworzywo:
302
Powierzchnia:
Jasne/powlekane mydłem
Nazwa produktu:
1,2 mm 1,4 mm 302 Pokryte mydłem ze stali nierdzewnej drut sprężynowy
Typ:
Twarde/miękkie
Uszczelka:
szpula, cewka
Opis produktu
Szczegółowe specyfikacje i cechy
302 Spring Wire - Drawing Die Material and Surface Two suppliers can draw the same rod down to 1.4 mm in 302 and deliver wire that looks the same on a certificate but differs on the surface. The difference is usually the die: which material it was made from, how long it has run, and whether the bearing length still matches the pass. Die choice is the quiet variable behind surface roughness, ovality, and the die marks that become fatigue origins in a finished spring. This page
Powiązane produkty

Odporny na korozję drut nierdzewny 0,15-12 mm, wyżarzany

Corrosion Resistant Stainless Steel Wire, Annealed 0.15-12 mm Corrosion resistance is usually discussed as a grade property, but on a finished part it is often a processing property. Cold drawing leaves residual tensile stress in the wire, and that stress is where chloride pitting and stress ...

Soft Annealed Stainless Wire 0.15-12mm for Cold Forming

Soft Annealed Stainless Steel Wire for Cold Forming, 0.15-12 mm Cold forming shops care about two numbers on a soft annealed wire: how much force the part needs at the bend, and how much that force moves from coil to coil. A wire that is soft on Monday and half work-hardened on Friday changes press ...

1.2mm 669 Bright Annealed Wire 0.15-12mm for Forming

Bright Annealed 1.2mm 669 Stainless Wire for Visible Parts Bright annealing is the step that decides whether a stainless wire part can be sold without polishing. The wire is annealed in a controlled reducing atmosphere straight after drawing, so no oxide scale forms and the surface stays metallic ...

Wyżarzony drut ze stali nierdzewnej SUS304 0,15-12 mm dla łatwego formowania

Annealed SUS304 Stainless Steel Wire for Forming, 0.15-12 mm SUS304 (EN 1.4301) wire supplied in the annealed condition is chosen when a part has to be bent, coiled or woven after the wire arrives. Annealing removes the work-hardening left by drawing, so the wire deforms with a predictable force ...